Powerful portable bus covering all commonly used bands for talk and data transmissions. 

Do not interfere with the most advanced jammer from pure spectral output outside defined boundary bands, which is a frequent non-slate of simpler inexpensive structures. 

The series is based on advanced RISC 

The micro -controller solution in combination with PLL transmitter synthesis, which ensures minimal interference outside the required bandwidth, high quality of processing and reliability even at given broadcast performances.

Since it is a base station, it is not equipped with internal batteries and is designed to be powered from the supplied 230V/50Hz power supply, it is possible to finish the battery power supply. Or, if the power needs to be supplied in field conditions, the problem is not to supply the power supply for the parameters you specify. You can turn on interference by using a local switch on the station. 

Cellular jammers 8-14 degrees (5) B

Cellular jammers are designed to suppress unauthorized data retrieval equipment operating in mobile network standards, Bluetooth or WiFi. Their operation is based on generating noise interference in the required frequency band. Besides, they enable gradual adjustment of the interference signal power in all the bands, which facilitates blocking of wireless communication standards within the protected room only.

This device is a leader in the sigint series of blocking devices, as it combines all the functions.

GSM Jammer 675-4x350mW including 3G band + supplemented by WiFi 2.4GHz band.

GSM DCS 3G WiFi

That's 4 bands in one device.

Possible interruption in the range 0-10m from the pancae about 15m/2. 

Internal power supply 12V/1600mA rechargeable battery, operating time approx. 60min.  

The device can also be powered directly through an adapter from a 230V network or a 12V autoadapter. 

The scale, including the battery, is 

Size 110x60x30mm

You can no longer put the device in your bag, but there is no problem operating it in your briefcase.

CDMA GSM DCS 3G

Its reach is fully sufficient to interfere with office space of 80m/2. Of course it depends mainly on the proximity of the GSM operator near you. 

The device is powered by a 230V network and can be placed in a cabinet on your desk. Its performance is richly sufficient for use in special-interest office space. 

The device is already mounted in a stronger AL body and also has 2x fans for perfect permanent cooling. Of course, the device can also be operated via the converter by mobile design.

Stationary bus 679-4x2W for each GSM band. (8W full)

CDMA GSM DCS 3G

Its reach is fully sufficient to interfere with office space of 30m/2. Of course it depends mainly on the proximity of the GSM operator near you. 

The device is powered by a 230V network and can be placed in a cabinet on your desk. Its performance is richly sufficient for use in special-interest office space. 

Mobile bus 218-VF900-1800 GSM + 3G, Full 8 W. 

The device is already mounted in a stronger AL body for perfect permanent cooling with no time limit and no fan.  The device does not have an active cooler, the maximum home operation is within 12 hours

Powerful robust base broadband locomotive tuned to one of the bands disturbed

You may not test or demonstrate the equipment in public within the meaning of the law, only in modified conference rooms where unwanted radio spectrum does not leak outside the designated room. Its total power output is up to 22W. 

As it is a base station, it is not equipped with internal batteries and is designed to be powered from the supplied 230V/50Hz mains source. When power is required in field conditions, the problem is not to supply the power supply for the parameters you specify. You can turn on interference by using a local switch on the station.

Powerful robust base broadband locomotive tuned to one of the bands disturbed, including the LTE band

You may not test or demonstrate the equipment in public within the meaning of the law, only in modified conference rooms where unwanted radio spectrum does not leak outside the designated room. Its total power output is up to 18W. 

As it is a base station, it is not equipped with internal batteries and is designed to be powered from the supplied 230V/50Hz mains source. When power is required in field conditions, the problem is not to supply the power supply for the parameters you specify. You can turn on interference by using a local switch on the station.

GSM Jammer 217-3x350mW including 3G band. (900mW FULL)

Possible interruption in the range 0-10m from the pancae about 15m/2. 

Internal power supply 12V/1600mA rechargeable battery, operating time approx. 60min.  

Miniature GSM band breaker with built-in battery. It operates in all bands designed for the following type of communication: 850/1900 MHz and 900/1800 MHz.

The defeat signal is transmitted in an omnidirectional manner and the ideal location is the center of the space that we want to cover with the driver. Interference covers both GSM bands (900 MHz, 1800 MHz) and both CDMA bands (850 MHz, 1900 MHz). The jamming device is designed to interfere with the operation of mobile phones and GPRS modems especially in smaller areas such as offices, apartments, etc.

Wireless camera case 224-3x 350mW

(prevent wireless cameras from operating) 

Total weight of the device 250g. 

Power supply from your own battery, or possibility to connect to a 230V network.

The range of about 0-15m is fully sufficient for normal use in buildings.

  Output Frequency Average Output Channel Performance  

  895/900 - 1000 MHz +25dBm / 350mW  

  1195/1200 - 1300 MHz +25dBm / 350mW  

  WiFi 2395/2400 - 2500MHz +25dBm / 300mW  

Weight: 300g Size: 62(L)×30(D)×110(

Power: Ni-H battery DC12V/1600mA/h Prevadz.: 90min.  

Radius: (15-20)meters@-75dBm NTSC,PAL, SECAM,802.11b/g  

Power dissiapation: 1W 

Product from the group "Special Mode"

The product of a group of "special regime"