The signal amplifier for the mobile phone (also known as an amplifier or amplifier) consists of three main elements - an external antenna, an amplifier, and an internal antenna.

The mobile phone reception amplifier is a refresher system that includes an amplifier that receives amplification or power reception in different directions. The task of the external antenna is to receive and transmit the signal from the tower (winger) and transfer it to the amplifier. The gain of the antenna is usually not less than 7 dB and can be greater than 10 dB.

Hybrid clutch merge designed to meet the specific wireless market needs most commonly used to combine two mobile operators on one feed antenna and cable.

This requires the termination of one output port in 50 ohms, and results in a loss of 3 dB in each signal. In situations where two similar feeds are necessary, for example in the building of applications, both outputs can be used, eliminating the need for termination and 3 dB losses.

Repeater use for the foundering gsm amplification of the call band.

GSM Amplifier Repeater 951KW27F-GSM repeater use for the foundering amplification of the GSM call band.

Functional for: Orange, Telekom, O2.

It perfectly amplifies the signal inside the building and outside the building.

It is the ideal device for use where there is insufficient signal for your mobile phone and is suitable for any home or business.

The load range of the resistors termination is designed to provide an economic solution to the ever growing need for a compact, robust and easy end suitable for bench or filed use. Coaxial loads either to use a silent resistance chip or rod resistor depending on the desired power.

Black anodized aluminum alloy heat sinks are used for maximum thermal radiation with Type N connectors, however, additional connectors can be offered to meet the specific requirements of customers.

This series of endings are a medium power coaxial load that operates from DC to 2.5 GHz. Cooling ribs minimize temperature rise. The finishing element is enclosed in carefully enclosed coaxial housing. Standard connectors N and 7-16 DIN male or female.

Profi GSM Signal Amplifier for Mobile Phone 950KW13D-LGDWL 5 band repeater use for 2G/3G/4G networks – all available frequency bands.

It amplifies the signal inside the building and outside the building. 

Functional for: Orange, Telekom, O2, Swan + data traffic by frequency band – see info in the frequency table. It is the ideal device for use where there is insufficient signal for your mobile phone and is suitable for any home or business.

Attenuating cells are available in ratings of 10,25,50 and 100Watts, and are available in attenuation factors 1,2,3,4,5,6,7,8,9,10,20 and 30dB.

The range of attenuating cells is available in ratings of 10,25,50 and 100Watts, and are available in attenuation factors 1,2,3,4,5,6,7,8,9,10,20 and 30dB.

To fasten these devices are arranged in such a way as to allow flexibility for inclusion in all types of equipment. A wide range of alternative motherboards can be offered with drilled holes and tapped according to customer requirements.

ICS Pico Repeater, just put in the window and the GSM powercleaner is already

Pico ICS Repeater is a two-way amplifier with built-in donor antenna and antenna services that is used to strengthen the signal between mobile and base stations.

This amplifier can automatically detect and cancel signal interference caused by the rf feedback between the donor and the antenna services in real time by adopting DSP technology. It can continuously and permanently cancel interference signals and adapt any changes in the surrounding RF environment.

This amplifier works well in providing high output performance of the service without oscillation, but can also cover the service without using an additional antenna.

DECT REPEATER new believe 2011 to 12x chaining repeaters in series RTX4012-NEW-887

New in the summer market of DECT signal repeaters (repeaters), which can be retadied in a series in a row and up to 12 repeaters can be connected in a single cell. A given repeater is a device that allows the range of your existing cordless DECT phone to be extended to areas where signal reception was not possible before.

Up to 5 active narrowband DECT calls simultaneously, it can only handle this repeater. Setting up all repeating scans is a must be set up via the PC tool.

A repeater is a device that allows the range of your existing cordless DECT phone to be extended to areas where signal reception was not possible before.

Hub/splitter with four outputs. Suitable for GSM repeater if needed multiple antennas for internal distribution. It is equipped with five N(f) connectors.

GSM amplifier in 3G band

You don't have a GSM signal, but you can capture the GSM signal near you. - Use an active GSM signal amplifier. GSM - REPEATER. GSM 3G signal amplifier, including antennas.

A New Opera Interview Sheds More Light On Wii BrowserThe device is a duplex amplifier in the GSM band 900MHz. It serves as a repeater – gsm signal amplifier, which is transformed from the external environment into an internal environment, so-called shaded spaces, where in normal conditions the GSM signal does not receive sufficient quality. It is suitable for places in buildings where there is no signal (garages, tunnels, cellars, alpine hotels), but at least at some point GSM signal you have sufficient – roof, window upstairs...

Hub/splitter with three outputs. Suitable for GSM repeater if needed multiple antennas for internal distribution. It is equipped with four N(f) connectors.

RF 433MHz power amplifier 500mW, 433MHz RF linear amplifier 301

PLA-05W-433AT is a linear monolithic power amplifier (classAB) suitable for amplifying 433.92MHz signals from low power RF transmitters. It offers low signal distortion and low harmonic generation. Either analog or digital input carriers between 430MHz and 435MHz are suitable. PLA-05W-433AT is ideal for applications where increased communication range is required or where RF interference causes communication problems.

RF input and output signals are via RPSMA connectors or using screw terminals, or a combination of these two types of connectors. Power supply and external amplifier allow voltages are applied through the three positions of the screw terminal.

Hub/splitter with two outputs. Suitable for GSM repeater if needed multiple antennas for internal distribution. It is set with three N(f) connectors.

Omnidirectional ceiling antenna for GSM 900/1800 MHz band. Band: 824 - 2500 MHz, Gain: 3/5 dB

Omnidirectional ceiling antenna for gsm 900/1800 MHz - UFO band.

The most common use is as an internal antenna for GSM signal amplifiers in a given band. Ideal for installation in cassette ceilingceilings.

external or internal directional antenna,

broadband 806-960MHz profit 7.5 dBi

GSM/DSC/UMTS antenna is a panel, directional antenna used in cooperation with GSM amplifiers (repeaters) AT500A, AT600A, AT608A, AT700A, AT800A...

The antenna is characterized by a gain of 7.5 dBi in the 806-960 MHz band and 10 dBi in the 1710-2500 MHz band, making it ideal for GSM, DCS and 3G amplifiers, whether for indoor or outdoor use.

Omnidirectional antenna band: 824 - 960 MHz, Profit: 2,5 dB

Omnidirectional antenna for GSM 900 MHz band. Most commonly used as an internal antenna for gsm amplifier (repeater) in a given band.

Directional Antenna / Sectorstrahler Monoband transmitting and receiving antenna for infrastruktur use Monoband Sende- und Empfangsantenne / Infrastruktur Polarization: Linear Radiation characteristics: Directional Gain: 10 dBi typ. VSWR: Ł 2 typ. Impedanz: 50 W Antenna typ: Patch-Resonator-Antenna max. power: 20 W HF-connection: N(f) connector

Directional Antenna / Sectorstrahler Monoband transmitting and receiving antenna for infrastruktur use Monoband Sende- und Empfangsantenne / Infrastruktur Polarization: Linear Radiation characteristics: Directional Gain: 10 dBi typ. VSWR: Ł 2 typ. Impedanz: 50 W Antenna typ: Patch-Resonator-Antenna max. power: 20 W HF-connection: N(f) connector

GSM Directional Antenna

Directional Antenna / Sectorstrahler Monoband transmitting and receiving antenna for infrastruktur use Monoband Sende- und Empfangsantenne / Infrastruktur Polarization: Linear Radiation characteristics: Directional Gain: 10 dBi typ. VSWR: Ł 2 typ. Impedanz: 50 W Antenna typ: Patch-Resonator-Antenna max. power: 20 W HF-connection: N(f) connector

Extension coaxial cable with impedance 50 Ohm.

Suitable for GSM repeaters and antennas. Terminated with N (m) connectors.

Technical parameters:

Internal conductor: Ř 2.70 mm Cu

Dielectric: Ř 7.20 mm PEE gas

Outer foils: CuPet 20-23 100%

Braid: Ř 7.80 mm CuSn

Braid coverage: 50%

Jacket: Ř 10.30 mm PV

Mechanical properties: Min.poloměr bend: 50/100 mm

Weight: 139.2 kg / km

Electrical properties: Impedance: 50 ± 2 ©

Capacity: 80 ± 2 pF / m

Shortener: 83%

Efficiency shielding:> 90 dB

Attenuation and Max.power at 20 ° C: 30 MHz - 2,1 dB/100m - 3,36 kW

762-TNC pin crimping RG58 – angular

763-TNC pin schism RG58-straight

The GSM hub is suitable for branching GSM signals within the building into more self-separated rooms.  

Coaxial cable RF240 6GHz with N-Male / SMA-Female terminals of 1m code 689

Coaxial cable RF240 N-Male / SMA-Female length 1m

Coaxial cable RF240 6GHz with N-Male / SMA-Female terminals of 1m code 689

Suitable for VF technology according to your destination. Quality factory professional design, koax tested. 100% connector design.

Coaxial cable RF240 6GHz with N-Male / N-Female terminals of length 10m code 688

Coaxial cable RF240 N-Male / N-Female length 10m

Coaial cable RF240 6GHz with N-Male / N-Female terminals of 10m code 688

Suitable for GSM amplifiers for the extension of outdoor or indoor antenna. It includes N-Male/N-Female so it's virtually versatile, but you don't have multiple connectors on one VF route. Quality factory professional design, koax tested. 100% connector design.

Coaxial cable RF240 6GHz with N-Male / N-Male terminals of length 20m code 684

Coaxial cable RF240 N-Male / N-Male length 20m

Coaxial cable RF240 6GHz with N-Male / N-Male terminals of length 20m code 684

Suitable for GSM amplifiers for the possibility of extending the interior antenna. Quality factory professional design, koax tested. 100% connector design.

Coaxial cable RF240 6GHz with N-Male / N-Male terminals of length 30m code 686

Coaxial cable RF240 N-Male / N-Male length 30m

Coaxial cable RF240 6GHz with N-Male / N-Male terminals of length 30m code 686

Suitable for GSM amplifiers for the possibility of extending the interior antenna. Quality factory professional design, koax tested. 100% connector design.

Omnidirectional ceiling antenna for GSM 900/1800 MHz band. Band: 824 - 2500 MHz, Gain: 3/5 dB

Omnidirectional ceiling antenna for gsm 900/1800 MHz - UFO band.

The most common use is as an internal antenna for GSM signal amplifiers in a given band. Ideal for installation in cassette ceilingceilings.

These high performance directional couplings support internal/external applications in GSM, DCS and 3G bands up to 2500 MHz. Each steam unit defined the fraction of a powerful mobile signal with minimal reflections or losses. 

The wide frequency range allows use with multiband antennas, radiating cable systems, and wireless base stations. 

The dispositional loss was as small as possible and reliability strengthened. Each directional binding member comes with mounting hardware for easy wall mounting or mast.

The performance range of attenuating cells is available in ratings of 10,25,50 and 100Watts, and are available in attenuation factors 1,2,3,4,5,6,7,8,9,10,20 and 30dB.

To fasten these devices are arranged in such a way as to allow flexibility for inclusion in all types of equipment. A wide range of alternative motherboards can be offered with drilled holes and tapped according to customer requirements.