JA-110P is a bus PIR motion detector designed 

JA-110P PET Bus PIR motion detector with basic immunity against animals

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. The detector meets the highest quality and design requirements, thanks to which it can also be used in luxurious interiors.

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of persons in the interior of buildings. Its guaranteed detection coverage is 90°/12 m. In a variant with a gray lens, its resistance to white light significantly exceeds the prescribed values of the standard. The detector meets the highest quality and design requirements, thanks to which it is also applied in luxurious interiors.

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of persons in the interior of buildings. Compared to standard PIR motion detectors from the JABLOTRON 100+ series, this detector is designed for ceiling installation.

The JA-120PB detector is used to spatially detect the movement of persons in the interior of buildings and to detect breakage of glass surfaces forming the cladding of buildings. It contains two independent detectors.

Ja-120PC is a motion PIR detector with built-in camera module. Allows you to detect movement in a protected area, including visual confirmation of the alarm. The detector camera is equipped with flash for quality photo shoots at night.

It is used for spatial detection of the movement of persons in the interior of buildings, including visual confirmation of the alarm. The photo shoot is activated by movement, so the cause of the alarm is always recorded on the image. Guaranteed detection coverage 90°/12 m

The JA-120PW detector is designed for spatial detection of the movement of persons in the interior of buildings. Thanks to combinations of PIR motion detection and microwave detection, the detector is highly resistant to false alarms.

It is especially suitable for the reconstruction of wired alarms, when the detectors are maintained. It is also very common to control multiple appliances using PG outputs.

The JA-112J button is used to trigger an emergency alarm or to control PG outputs.

JA-110P is a bus PIR motion detector designed to protect interiors through infra-passive motion detection in the room. Detection characteristics can be optimized with interchangeable lenses.

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Unlike standard PIR motion detectors from the JABLOTRON 100+ series, its detection characteristics have been modified and it has basic immunity against animals.

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. The detector meets the highest quality and design requirements, thanks to which it can also be used in luxurious interiors.

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. In the variant with a gray lens, its resistance to white light significantly exceeds the prescribed values ​​of the standard. The detector meets the highest quality and design requirements, thanks to which it can also be used in luxurious interiors.

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Unlike standard PIR motion detectors from the JABLOTRON 100+ series, this detector is designed for ceiling installation.

The JA-120PB detector is used to spatially detect the movement of people in the interior of buildings and to detect the breakage of glass surfaces forming the building envelope. It contains two independent detectors.

JA-120PC is a motion PIR detector with a built-in camera module. Allows you to detect movement in a protected area, including visual confirmation of an alarm. The detector camera is equipped with a flash for quality photography at night.

It is used for spatial detection of movement of people in the interior of buildings, including visual confirmation of the alarm. Shooting is activated by motion, so the cause of the alarm is always recorded on the image. Guaranteed detection coverage 90 ° / 12 m.

The JA-120PW detector is designed for spatial detection of the movement of people in the interior of buildings. Thanks to the combination of PIR motion detection and microwave detection, the detector is highly resistant to false alarms.

The product is a bus component of the JABLOTRON 100+ system. It is designed for spatial detection of movement of people in the interior of buildings. Thanks to the combination of motion and microwave (MW) detection, it is highly resistant to false alarms. When motion is detected in the protected area, the MW detector is also activated, which confirms the previous activation of the PIR detector.

The product is a bus component of the JABLOTRON 100+ system. It is designed for spatial detection of movement of people in the interior of buildings. Thanks to the combination of motion and microwave (MW) detection, it is highly resistant to false alarms. When motion is detected in the protected area, the MW detector is also activated, which confirms the previous activation of the PIR detector.

Used to measure and control room temperature. The thermostat expands the possibilities of the JABLOTRON 100+ system in the field of home automation of simple zone control. The standard programmable outputs of the control panel are used for switching the heating.

The JA-110ST bus fire detector is designed for combined (optical and temperature) fire detection in residential and commercial buildings.

It is designed to detect fire hazards in the interior of residential or commercial buildings. It includes a siren that reports a fire alarm from its own detector as well as from other fire detectors in the system.

Based on the measured temperature, it allows to control the heating using the programmable output of the control panel. All functions are set in MyJABLOTRON, so the user can monitor and control everything at any time and from anywhere.

It is a plug-in module designed for installation in an autonomous CO detector Ei208W or Ei208DW, which allows its bus connection to the JABLOTRON 100+ system.

The detector is used to detect flooding of premises (warehouse, bathroom, cellar, etc.) with water. It sends this information to the JABLOTRON 100+ system via the bus.

The bus thermometer is used in outdoor or climatically demanding environments. In the MyJABLOTRON application, it is possible to draw a temperature graph, set temperature notifications or switch PG outputs when a certain temperature is reached.

It is used to detect fire hazards in the interior of residential or commercial buildings. It is not intended for installation in an industrial environment. The detector is powered from the control panel bus (EN 54-7; EN 54-5).

The JA-111H TRB module is used to connect any wire detector (with contact or pulse outputs) to the JABLOTRON 100+ system and provides power for it. This built-in module can be placed directly in the detector.

The JA-116H module enables power supply and assignment of up to 16 detectors with contact outputs to the JABLOTRON 100+ system bus. The connection method can be selected for each input separately.

It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m and in the variant with a gray lens, its resistance to white light significantly exceeds the prescribed values ​​of the standard.

It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. The product is the result of very high quality and design goals and its shape also fits aesthetically into a luxurious interior.

Detects the opening of doors or windows. It communicates with the control panel via the bus. The cover is protected by a sabotage contact. The detector is activated after the permanent magnet moves away from the sensor.

Detects the opening of doors or windows. It communicates with the control panel via the bus. The cover is protected by a sabotage contact. The detector is activated after the permanent magnet moves away from the sensor.

The product is a bus component of the JABLOTRON 100+ system. The bus module is used to connect a wide range of magnetic detectors to detect the opening of doors and windows. It has two independent inputs with the possibility of full setting of their properties.

The module allows the assignment of up to 8 magnetic detectors to the bus of the JABLOTRON 100+ system. The connection can be selected in an expansion loop, a simply balanced loop (R = 1 kΩ), or a loop activated by repeated pulses (blind).

The JA-110B bus glass break detector detects the breaking of glass door and window panels. Detection is based on dual technology (detection of a change in air pressure accompanied by a characteristic sound of glass breaking).

The JA-111SH bus detector has two modes of operation. Shake detection mode for doors, windows, light partitions, etc. may indicate an attempt to overcome them by brute force and the tilt detection mode may indicate the manipulation of a valuable object, safe ...

It is used to indicate flooding of the area (basement, bathroom, boiler room ...). The information can be passed to the security system and sent to the owner.

The JA-110M bus module is intended for the connection of magnetic door and window opening detectors. It contains two independent programmable inputs, which can be NC / NO or resistor balanced.