Based on the measured temperature, it allows to control the heating using the programmable output of the control panel. All functions are set in MyJABLOTRON, so the user can monitor and control everything at any time and from anywhere.

The JA-111SH bus detector has two modes of operation. Shake detection mode for doors, windows, light partitions, etc. may indicate an attempt to overcome them by brute force and the tilt detection mode may indicate the manipulation of a valuable object, safe ...

It is designed to detect fire hazards in the interior of residential or commercial buildings. It includes a siren that reports a fire alarm from its own detector as well as from other fire detectors in the system.

The JA-120PW detector is designed for spatial detection of the movement of persons in the interior of buildings. Thanks to combinations of PIR motion detection and microwave detection, the detector is highly resistant to false alarms.

The JA-116H module enables power supply and assignment of up to 16 detectors with contact outputs to the JABLOTRON 100+ system bus. The connection method can be selected for each input separately.

JA-110P PET Bus PIR motion detector with basic immunity against animals

The product is a bus component of the JABLOTRON 100+ system. It is designed for spatial detection of movement of people in the interior of buildings. Thanks to the combination of motion and microwave (MW) detection, it is highly resistant to false alarms. When motion is detected in the protected area, the MW detector is also activated, which confirms the previous activation of the PIR detector.

The JA-110M bus module is intended for the connection of magnetic door and window opening detectors. It contains two independent programmable inputs, which can be NC / NO or resistor balanced.

JA-120PC is a motion PIR detector with a built-in camera module. Allows you to detect movement in a protected area, including visual confirmation of an alarm. The detector camera is equipped with a flash for quality photography at night.

The detector is used to detect flooding of premises (warehouse, bathroom, cellar, etc.) with water. It sends this information to the JABLOTRON 100+ system via the bus.

It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. The product is the result of very high quality and design goals and its shape also fits aesthetically into a luxurious interior.

It is used to indicate flooding of the area (basement, bathroom, boiler room ...). The information can be passed to the security system and sent to the owner.

JA-110P is a bus PIR motion detector designed to protect interiors through infra-passive motion detection in the room. Detection characteristics can be optimized with interchangeable lenses.

Used to measure and control room temperature. The thermostat expands the possibilities of the JABLOTRON 100+ system in the field of home automation of simple zone control. The standard programmable outputs of the control panel are used for switching the heating.

JA-110P is a bus PIR motion detector designed 

Detects the opening of doors or windows. It communicates with the control panel via the bus. The cover is protected by a sabotage contact. The detector is activated after the permanent magnet moves away from the sensor.