The JA-110M bus module is intended for the connection of magnetic door and window opening detectors. It contains two independent programmable inputs, which can be NC / NO or resistor balanced.

The JA-111H TRB module is used to connect any wire detector (with contact or pulse outputs) to the JABLOTRON 100+ system and provides power for it. This built-in module can be placed directly in the detector.

Detects the opening of doors or windows. It communicates with the control panel via the bus. The cover is protected by a sabotage contact. The detector is activated after the permanent magnet moves away from the sensor.

The JA-120PW detector is designed for spatial detection of the movement of persons in the interior of buildings. Thanks to combinations of PIR motion detection and microwave detection, the detector is highly resistant to false alarms.

The JA-111SH bus detector has two modes of operation. Shake detection mode for doors, windows, light partitions, etc. may indicate an attempt to overcome them by brute force and the tilt detection mode may indicate the manipulation of a valuable object, safe ...

Based on the measured temperature, it allows to control the heating using the programmable output of the control panel. All functions are set in MyJABLOTRON, so the user can monitor and control everything at any time and from anywhere.

It is especially suitable for the reconstruction of wired alarms, when the detectors are maintained. It is also very common to control multiple appliances using PG outputs.

It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. The product is the result of very high quality and design goals and its shape also fits aesthetically into a luxurious interior.

Ja-120PC is a motion PIR detector with built-in camera module. Allows you to detect movement in a protected area, including visual confirmation of the alarm. The detector camera is equipped with flash for quality photo shoots at night.

The module allows the assignment of up to 8 magnetic detectors to the bus of the JABLOTRON 100+ system. The connection can be selected in an expansion loop, a simply balanced loop (R = 1 kΩ), or a loop activated by repeated pulses (blind).

The JA-110ST bus fire detector is designed for combined (optical and temperature) fire detection in residential and commercial buildings.

JA-110P PET Bus PIR motion detector with basic immunity against animals

It is used to indicate flooding of the area (basement, bathroom, boiler room ...). The information can be passed to the security system and sent to the owner.

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. The detector meets the highest quality and design requirements, thanks to which it can also be used in luxurious interiors.

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Unlike standard PIR motion detectors from the JABLOTRON 100+ series, this detector is designed for ceiling installation.

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Unlike standard PIR motion detectors from the JABLOTRON 100+ series, its detection characteristics have been modified and it has basic immunity against animals.