The JA-110M bus module is intended for the connection of magnetic door and window opening detectors. It contains two independent programmable inputs, which can be NC / NO or resistor balanced.

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Unlike standard PIR motion detectors from the JABLOTRON 100+ series, this detector is designed for ceiling installation.

The product is a bus component of the JABLOTRON 100+ system. The bus module is used to connect a wide range of magnetic detectors to detect the opening of doors and windows. It has two independent inputs with the possibility of full setting of their properties.

The JA-120PB detector is used to spatially detect the movement of persons in the interior of buildings and to detect breakage of glass surfaces forming the cladding of buildings. It contains two independent detectors.

The JA-111SH bus detector has two modes of operation. Shake detection mode for doors, windows, light partitions, etc. may indicate an attempt to overcome them by brute force and the tilt detection mode may indicate the manipulation of a valuable object, safe ...

The JA-120PW detector is designed for spatial detection of the movement of persons in the interior of buildings. Thanks to combinations of PIR motion detection and microwave detection, the detector is highly resistant to false alarms.

The module allows the assignment of up to 8 magnetic detectors to the bus of the JABLOTRON 100+ system. The connection can be selected in an expansion loop, a simply balanced loop (R = 1 kΩ), or a loop activated by repeated pulses (blind).

The detector is used to detect flooding of premises (warehouse, bathroom, cellar, etc.) with water. It sends this information to the JABLOTRON 100+ system via the bus.

The bus thermometer is used in outdoor or climatically demanding environments. In the MyJABLOTRON application, it is possible to draw a temperature graph, set temperature notifications or switch PG outputs when a certain temperature is reached.

Used to measure and control room temperature. The thermostat expands the possibilities of the JABLOTRON 100+ system in the field of home automation of simple zone control. The standard programmable outputs of the control panel are used for switching the heating.

JA-120PC is a motion PIR detector with a built-in camera module. Allows you to detect movement in a protected area, including visual confirmation of an alarm. The detector camera is equipped with a flash for quality photography at night.

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. The detector meets the highest quality and design requirements, thanks to which it can also be used in luxurious interiors.

The product is a bus component of the JABLOTRON 100+ system. It is designed for spatial detection of movement of people in the interior of buildings. Thanks to the combination of motion and microwave (MW) detection, it is highly resistant to false alarms. When motion is detected in the protected area, the MW detector is also activated, which confirms the previous activation of the PIR detector.

It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m and in the variant with a gray lens, its resistance to white light significantly exceeds the prescribed values ​​of the standard.

The JA-120PW detector is designed for spatial detection of the movement of people in the interior of buildings. Thanks to the combination of PIR motion detection and microwave detection, the detector is highly resistant to false alarms.

Detects the opening of doors or windows. It communicates with the control panel via the bus. The cover is protected by a sabotage contact. The detector is activated after the permanent magnet moves away from the sensor.