The module allows the assignment of up to 8 magnetic detectors to the bus of the JABLOTRON 100+ system. The connection can be selected in an expansion loop, a simply balanced loop (R = 1 kΩ), or a loop activated by repeated pulses (blind).

The JA-110M bus module is intended for the connection of magnetic door and window opening detectors. It contains two independent programmable inputs, which can be NC / NO or resistor balanced.

It is used to indicate flooding of the area (basement, bathroom, boiler room ...). The information can be passed to the security system and sent to the owner.

JA-110P PET Bus PIR motion detector with basic immunity against animals

The JA-110ST bus fire detector is designed for combined (optical and temperature) fire detection in residential and commercial buildings.

It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m and in the variant with a gray lens, its resistance to white light significantly exceeds the prescribed values ​​of the standard.

The JA-110B bus glass break detector detects the breaking of glass door and window panels. Detection is based on dual technology (detection of a change in air pressure accompanied by a characteristic sound of glass breaking).

It is especially suitable for the reconstruction of wired alarms, when the detectors are maintained. It is also very common to control multiple appliances using PG outputs.

The product is a bus component of the JABLOTRON 100+ system. It is designed for spatial detection of movement of people in the interior of buildings. Thanks to the combination of motion and microwave (MW) detection, it is highly resistant to false alarms. When motion is detected in the protected area, the MW detector is also activated, which confirms the previous activation of the PIR detector.

It is designed to detect fire hazards in the interior of residential or commercial buildings. It includes a siren that reports a fire alarm from its own detector as well as from other fire detectors in the system.

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. The detector meets the highest quality and design requirements, thanks to which it can also be used in luxurious interiors.

JA-110P is a bus PIR motion detector designed 

It is used for spatial detection of the movement of persons in the interior of buildings, including visual confirmation of the alarm. The photo shoot is activated by movement, so the cause of the alarm is always recorded on the image. Guaranteed detection coverage 90°/12 m

It is used for spatial detection of movement of people in the interior of buildings, including visual confirmation of the alarm. Shooting is activated by motion, so the cause of the alarm is always recorded on the image. Guaranteed detection coverage 90 ° / 12 m.

It is used to detect fire hazards in the interior of residential or commercial buildings. It is not intended for installation in an industrial environment. The detector is powered from the control panel bus (EN 54-7; EN 54-5).

Ja-120PC is a motion PIR detector with built-in camera module. Allows you to detect movement in a protected area, including visual confirmation of the alarm. The detector camera is equipped with flash for quality photo shoots at night.