Wb Menu
JA-110P is a bus PIR motion detector designed 
Safe shopping
Fast delivery
Hassle-free return of goods
0 tax excl.
JA-110P is a pir bus motion detector designed to protect interiors through infra-pass motion detection in the room. Detection characteristics can be optimised using interchangeable lenses. Through interchangeable lenses, the detector can be adjusted to protect long corridors, eliminate alarm triggering by movement of the pet or guard with a vertical curtain. JS-7904 - corridor JS-7910 - Animal JS-7902 - curtain The degree of resistance to false alarms is adjustable in two levels. The detector communicates via a bus from which it is also powered. It is addressable and occupys one position in the system. Smart MEMORY (SMI) signaling allows visual verification of detector activation using an LED light. The SMI signal can be erased via the access module. Power supply: from the control bus 12 V (9 ... 15 V) Current consumption at backup (rest): 5 mA Current consumption for cable selection: 5 mA Recommended installation height: 2.5 m above floor level Detection angle / detection coverage: 110° / 12 m (with base lens) Dimensions: 95 x 60 x 55 mm, Classification: Grade 2 according to EN 50131-1, STN EN 50131-2-2 Environment according to: EN 50131-1 II. internal general Operating temperature range: -10 to +40 °C Also meets STN EN 50130-4, STN EN 55022
Specific References
JA-110P is a bus PIR motion detector designed to protect interiors through infra-passive motion detection in the room. Detection characteristics can be optimized with interchangeable lenses.
It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. The product is the result of very high quality and design goals and its shape also fits aesthetically into a luxurious interior.
Ja-120PC is a motion PIR detector with built-in camera module. Allows you to detect movement in a protected area, including visual confirmation of the alarm. The detector camera is equipped with flash for quality photo shoots at night.
It is used to indicate flooding of the area (basement, bathroom, boiler room ...). The information can be passed to the security system and sent to the owner.
Detects the opening of doors or windows. It communicates with the control panel via the bus. The cover is protected by a sabotage contact. The detector is activated after the permanent magnet moves away from the sensor.
It is used for spatial detection of movement of people in the interior of buildings, including visual confirmation of the alarm. Shooting is activated by motion, so the cause of the alarm is always recorded on the image. Guaranteed detection coverage 90 ° / 12 m.
Detects the opening of doors or windows. It communicates with the control panel via the bus. The cover is protected by a sabotage contact. The detector is activated after the permanent magnet moves away from the sensor.
The JA-120PB detector is used to spatially detect the movement of persons in the interior of buildings and to detect breakage of glass surfaces forming the cladding of buildings. It contains two independent detectors.
It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m and in the variant with a gray lens, its resistance to white light significantly exceeds the prescribed values of the standard.
The bus thermometer is used in outdoor or climatically demanding environments. In the MyJABLOTRON application, it is possible to draw a temperature graph, set temperature notifications or switch PG outputs when a certain temperature is reached.
It is used to detect fire hazards in the interior of residential or commercial buildings. It is not intended for installation in an industrial environment. The detector is powered from the control panel bus (EN 54-7; EN 54-5).
The JA-110B bus glass break detector detects the breaking of glass door and window panels. Detection is based on dual technology (detection of a change in air pressure accompanied by a characteristic sound of glass breaking).
The JA-110ST bus fire detector is designed for combined (optical and temperature) fire detection in residential and commercial buildings.
The product is a bus component of the JABLOTRON 100+ system. It is designed for spatial detection of movement of people in the interior of buildings. Thanks to the combination of motion and microwave (MW) detection, it is highly resistant to false alarms. When motion is detected in the protected area, the MW detector is also activated, which confirms the previous activation of the PIR detector.
It is used for spatial detection of the movement of persons in the interior of buildings, including visual confirmation of the alarm. The photo shoot is activated by movement, so the cause of the alarm is always recorded on the image. Guaranteed detection coverage 90°/12 m
The product is a bus component of the JABLOTRON 100+ system. It is designed for spatial detection of movement of people in the interior of buildings. Thanks to the combination of motion and microwave (MW) detection, it is highly resistant to false alarms. When motion is detected in the protected area, the MW detector is also activated, which confirms the previous activation of the PIR detector.