When alarmed, it takes color still photos in JPEG format in two HQ 640×480 and LQ 320×240 resolutions. If the motion is recorded, it takes a sequence of additional photos. These are stored in the internal detector memory (HQ) and wirelessly sent to the control panels from where they are sent outside the protected object (LQ).
Photo demos:
In addition to taking pictures at the alarm, the detector can take photos even when pg output is activated (monitoring various situations), or during the arrival delay (incoming person photo). All photos can then be viewed in jablotron web self-service in LQ quality (after clicking on the detail also in HQ), or it is possible to take new photos also on request.
Photo parameters:
VGA JPEG 640×480 (HQ quality stored in detector)
QVGA JPEG 320×240 (LQ quality sent outside protected object)
Internal memory:
microSD card (the oldest photos are overwritten by the latest)
examples of the estimated number of photos depending on the capacity of the memory card:
1 GB 8000 VGA + 8000 QVGA
2 GB 16000 VGA + 16000 QVGA
4 GB 32000 VGA + 32000 QVGA
Specifications
Control post bus power supply: +12 V (+9 ... +15 V)
Current consumption at backup (rest): 5 mA
Current consumption for cable selection: 5 mA
Recommended installation height: 2.5 m above floor level
PIR angle detection / shot length: 55° / 12 m (base lens)
Camera field of view: 43°
Lightning range: max. 3 meters
Camera resolution: LQ 320*240; HQ 640*480 points
Photo size: LQ/HQ (typically) 2-10kB / 2-64kB (6kB/ 35kB)
Time to transfer lq photo to control panels (typically): up to 20 sec. (10 sec.)
Typical time to upload photos of LQ to the server: 15 s / GPRS; 2s / LAN
Operating temperature range: -10 to +40 °C
Dimensions, weight: 110 x 60 x 55 mm, 102g
Classification grade 2
according to EN 50131-1, STN EN 50131-2-2
Environment according to EN 50131-1 II. indoor general
Operating temperature range: -10 to +40 °C
It also meets STN EN 50130-4, STN EN 55022, STN EN 50581
