The bus thermometer is used in outdoor or climatically demanding environments. In the MyJABLOTRON application, it is possible to draw a temperature graph, set temperature notifications or switch PG outputs when a certain temperature is reached.

JA-110P is a bus PIR motion detector designed 

The JA-110B bus glass break detector detects the breaking of glass door and window panels. Detection is based on dual technology (detection of a change in air pressure accompanied by a characteristic sound of glass breaking).

The JA-120PB detector is used to spatially detect the movement of persons in the interior of buildings and to detect breakage of glass surfaces forming the cladding of buildings. It contains two independent detectors.

Detects the opening of doors or windows. It communicates with the control panel via the bus. The cover is protected by a sabotage contact. The detector is activated after the permanent magnet moves away from the sensor.

Based on the measured temperature, it allows to control the heating using the programmable output of the control panel. All functions are set in MyJABLOTRON, so the user can monitor and control everything at any time and from anywhere.

The product is a bus component of the JABLOTRON 100+ system. The bus module is used to connect a wide range of magnetic detectors to detect the opening of doors and windows. It has two independent inputs with the possibility of full setting of their properties.

It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. The product is the result of very high quality and design goals and its shape also fits aesthetically into a luxurious interior.

The JA-112J button is used to trigger an emergency alarm or to control PG outputs.

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of persons in the interior of buildings. Its guaranteed detection coverage is 90°/12 m. In a variant with a gray lens, its resistance to white light significantly exceeds the prescribed values of the standard. The detector meets the highest quality and design requirements, thanks to which it is also applied in luxurious interiors.

The JA-111SH bus detector has two modes of operation. Shake detection mode for doors, windows, light partitions, etc. may indicate an attempt to overcome them by brute force and the tilt detection mode may indicate the manipulation of a valuable object, safe ...

The JA-120PW detector is designed for spatial detection of the movement of persons in the interior of buildings. Thanks to combinations of PIR motion detection and microwave detection, the detector is highly resistant to false alarms.

The module allows the assignment of up to 8 magnetic detectors to the bus of the JABLOTRON 100+ system. The connection can be selected in an expansion loop, a simply balanced loop (R = 1 kΩ), or a loop activated by repeated pulses (blind).

JA-110P PET Bus PIR motion detector with basic immunity against animals

JA-120PC is a motion PIR detector with a built-in camera module. Allows you to detect movement in a protected area, including visual confirmation of an alarm. The detector camera is equipped with a flash for quality photography at night.

Ja-120PC is a motion PIR detector with built-in camera module. Allows you to detect movement in a protected area, including visual confirmation of the alarm. The detector camera is equipped with flash for quality photo shoots at night.