It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m and in the variant with a gray lens, its resistance to white light significantly exceeds the prescribed values ​​of the standard.

It is a plug-in module designed for installation in an autonomous CO detector Ei208W or Ei208DW, which allows its bus connection to the JABLOTRON 100+ system.

The JA-110M bus module is intended for the connection of magnetic door and window opening detectors. It contains two independent programmable inputs, which can be NC / NO or resistor balanced.

The JA-110ST bus fire detector is designed for combined (optical and temperature) fire detection in residential and commercial buildings.

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. The detector meets the highest quality and design requirements, thanks to which it can also be used in luxurious interiors.

Detects the opening of doors or windows. It communicates with the control panel via the bus. The cover is protected by a sabotage contact. The detector is activated after the permanent magnet moves away from the sensor.

Ja-120PC is a motion PIR detector with built-in camera module. Allows you to detect movement in a protected area, including visual confirmation of the alarm. The detector camera is equipped with flash for quality photo shoots at night.

The JA-120PB detector is used to spatially detect the movement of persons in the interior of buildings and to detect breakage of glass surfaces forming the cladding of buildings. It contains two independent detectors.

The JA-111SH bus detector has two modes of operation. Shake detection mode for doors, windows, light partitions, etc. may indicate an attempt to overcome them by brute force and the tilt detection mode may indicate the manipulation of a valuable object, safe ...

The module allows the assignment of up to 8 magnetic detectors to the bus of the JABLOTRON 100+ system. The connection can be selected in an expansion loop, a simply balanced loop (R = 1 kΩ), or a loop activated by repeated pulses (blind).

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. In the variant with a gray lens, its resistance to white light significantly exceeds the prescribed values ​​of the standard. The detector meets the highest quality and design requirements, thanks to which it can also be used in luxurious interiors.

The product is a bus component of the JABLOTRON 100+ system. It is designed for spatial detection of movement of people in the interior of buildings. Thanks to the combination of motion and microwave (MW) detection, it is highly resistant to false alarms. When motion is detected in the protected area, the MW detector is also activated, which confirms the previous activation of the PIR detector.

It is used for spatial detection of the movement of persons in the interior of buildings, including visual confirmation of the alarm. The photo shoot is activated by movement, so the cause of the alarm is always recorded on the image. Guaranteed detection coverage 90°/12 m

It is used to detect fire hazards in the interior of residential or commercial buildings. It is not intended for installation in an industrial environment. The detector is powered from the control panel bus (EN 54-7; EN 54-5).

It is used for spatial detection of movement of people in the interior of buildings, including visual confirmation of the alarm. Shooting is activated by motion, so the cause of the alarm is always recorded on the image. Guaranteed detection coverage 90 ° / 12 m.

The JA-116H module enables power supply and assignment of up to 16 detectors with contact outputs to the JABLOTRON 100+ system bus. The connection method can be selected for each input separately.