It is used for spatial detection of the movement of persons in the interior of buildings, including visual confirmation of the alarm. The photo shoot is activated by movement, so the cause of the alarm is always recorded on the image. Guaranteed detection coverage 90°/12 m

It is a plug-in module designed for installation in an autonomous CO detector Ei208W or Ei208DW, which allows its bus connection to the JABLOTRON 100+ system.

JA-110P is a bus PIR motion detector designed to protect interiors through infra-passive motion detection in the room. Detection characteristics can be optimized with interchangeable lenses.

The JA-111SH bus detector has two modes of operation. Shake detection mode for doors, windows, light partitions, etc. may indicate an attempt to overcome them by brute force and the tilt detection mode may indicate the manipulation of a valuable object, safe ...

The JA-110M bus module is intended for the connection of magnetic door and window opening detectors. It contains two independent programmable inputs, which can be NC / NO or resistor balanced.

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. The detector meets the highest quality and design requirements, thanks to which it can also be used in luxurious interiors.

Detects the opening of doors or windows. It communicates with the control panel via the bus. The cover is protected by a sabotage contact. The detector is activated after the permanent magnet moves away from the sensor.

Detects the opening of doors or windows. It communicates with the control panel via the bus. The cover is protected by a sabotage contact. The detector is activated after the permanent magnet moves away from the sensor.

The detector is used to detect flooding of premises (warehouse, bathroom, cellar, etc.) with water. It sends this information to the JABLOTRON 100+ system via the bus.

JA-110P is a bus PIR motion detector designed 

The JA-110B bus glass break detector detects the breaking of glass door and window panels. Detection is based on dual technology (detection of a change in air pressure accompanied by a characteristic sound of glass breaking).

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of persons in the interior of buildings. Its guaranteed detection coverage is 90°/12 m. In a variant with a gray lens, its resistance to white light significantly exceeds the prescribed values of the standard. The detector meets the highest quality and design requirements, thanks to which it is also applied in luxurious interiors.

The product is a bus component of the JABLOTRON 100+ system. It is designed for spatial detection of movement of people in the interior of buildings. Thanks to the combination of motion and microwave (MW) detection, it is highly resistant to false alarms. When motion is detected in the protected area, the MW detector is also activated, which confirms the previous activation of the PIR detector.

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. In the variant with a gray lens, its resistance to white light significantly exceeds the prescribed values ​​of the standard. The detector meets the highest quality and design requirements, thanks to which it can also be used in luxurious interiors.

The product is a bus component of the JABLOTRON 100+ system. The bus module is used to connect a wide range of magnetic detectors to detect the opening of doors and windows. It has two independent inputs with the possibility of full setting of their properties.

It is especially suitable for the reconstruction of wired alarms, when the detectors are maintained. It is also very common to control multiple appliances using PG outputs.