JA-110P is a bus PIR motion detector designed 

The JA-110B bus glass break detector detects the breaking of glass door and window panels. Detection is based on dual technology (detection of a change in air pressure accompanied by a characteristic sound of glass breaking).

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. The detector meets the highest quality and design requirements, thanks to which it can also be used in luxurious interiors.

Used to measure and control room temperature. The thermostat expands the possibilities of the JABLOTRON 100+ system in the field of home automation of simple zone control. The standard programmable outputs of the control panel are used for switching the heating.

The detector is used to detect flooding of premises (warehouse, bathroom, cellar, etc.) with water. It sends this information to the JABLOTRON 100+ system via the bus.

The bus thermometer is used in outdoor or climatically demanding environments. In the MyJABLOTRON application, it is possible to draw a temperature graph, set temperature notifications or switch PG outputs when a certain temperature is reached.

Detects the opening of doors or windows. It communicates with the control panel via the bus. The cover is protected by a sabotage contact. The detector is activated after the permanent magnet moves away from the sensor.

The JA-112J button is used to trigger an emergency alarm or to control PG outputs.

The JA-120PB detector is used to spatially detect the movement of people in the interior of buildings and to detect the breakage of glass surfaces forming the building envelope. It contains two independent detectors.

The product is a bus component of the JABLOTRON 100+ system. The bus module is used to connect a wide range of magnetic detectors to detect the opening of doors and windows. It has two independent inputs with the possibility of full setting of their properties.

It is used for spatial detection of movement of people in the interior of buildings. Its guaranteed detection coverage is 90 ° / 12 m. The product is the result of very high quality and design goals and its shape also fits aesthetically into a luxurious interior.

The JA-111H TRB module is used to connect any wire detector (with contact or pulse outputs) to the JABLOTRON 100+ system and provides power for it. This built-in module can be placed directly in the detector.

It is used to detect fire hazards in the interior of residential or commercial buildings. It is not intended for installation in an industrial environment. The detector is powered from the control panel bus (EN 54-7; EN 54-5).

The product is a bus component of the JABLOTRON 100+ system. It is used for spatial detection of movement of people in the interior of buildings. Unlike standard PIR motion detectors from the JABLOTRON 100+ series, its detection characteristics have been modified and it has basic immunity against animals.

The JA-111SH bus detector has two modes of operation. Shake detection mode for doors, windows, light partitions, etc. may indicate an attempt to overcome them by brute force and the tilt detection mode may indicate the manipulation of a valuable object, safe ...

Ja-120PC is a motion PIR detector with built-in camera module. Allows you to detect movement in a protected area, including visual confirmation of the alarm. The detector camera is equipped with flash for quality photo shoots at night.