Hybrid clutch merge designed to meet the specific wireless market needs most commonly used to combine two mobile operators on one feed antenna and cable.

This requires the termination of one output port in 50 ohms, and results in a loss of 3 dB in each signal. In situations where two similar feeds are necessary, for example in the building of applications, both outputs can be used, eliminating the need for termination and 3 dB losses.

The load range of the resistors termination is designed to provide an economic solution to the ever growing need for a compact, robust and easy end suitable for bench or filed use. Coaxial loads either to use a silent resistance chip or rod resistor depending on the desired power.

Black anodized aluminum alloy heat sinks are used for maximum thermal radiation with Type N connectors, however, additional connectors can be offered to meet the specific requirements of customers.

This series of endings are a medium power coaxial load that operates from DC to 2.5 GHz. Cooling ribs minimize temperature rise. The finishing element is enclosed in carefully enclosed coaxial housing. Standard connectors N and 7-16 DIN male or female.

Attenuating cells are available in ratings of 10,25,50 and 100Watts, and are available in attenuation factors 1,2,3,4,5,6,7,8,9,10,20 and 30dB.

The range of attenuating cells is available in ratings of 10,25,50 and 100Watts, and are available in attenuation factors 1,2,3,4,5,6,7,8,9,10,20 and 30dB.

To fasten these devices are arranged in such a way as to allow flexibility for inclusion in all types of equipment. A wide range of alternative motherboards can be offered with drilled holes and tapped according to customer requirements.

Hub/splitter with four outputs. Suitable for GSM repeater if needed multiple antennas for internal distribution. It is equipped with five N(f) connectors.

Hub/splitter with three outputs. Suitable for GSM repeater if needed multiple antennas for internal distribution. It is equipped with four N(f) connectors.

Hub/splitter with two outputs. Suitable for GSM repeater if needed multiple antennas for internal distribution. It is set with three N(f) connectors.

Omnidirectional ceiling antenna for GSM 900/1800 MHz band. Band: 824 - 2500 MHz, Gain: 3/5 dB

Omnidirectional ceiling antenna for gsm 900/1800 MHz - UFO band.

The most common use is as an internal antenna for GSM signal amplifiers in a given band. Ideal for installation in cassette ceilingceilings.

external or internal directional antenna,

broadband 806-960MHz profit 7.5 dBi

GSM/DSC/UMTS antenna is a panel, directional antenna used in cooperation with GSM amplifiers (repeaters) AT500A, AT600A, AT608A, AT700A, AT800A...

The antenna is characterized by a gain of 7.5 dBi in the 806-960 MHz band and 10 dBi in the 1710-2500 MHz band, making it ideal for GSM, DCS and 3G amplifiers, whether for indoor or outdoor use.

Omnidirectional antenna band: 824 - 960 MHz, Profit: 2,5 dB

Omnidirectional antenna for GSM 900 MHz band. Most commonly used as an internal antenna for gsm amplifier (repeater) in a given band.

Directional Antenna / Sectorstrahler Monoband transmitting and receiving antenna for infrastruktur use Monoband Sende- und Empfangsantenne / Infrastruktur Polarization: Linear Radiation characteristics: Directional Gain: 10 dBi typ. VSWR: Ł 2 typ. Impedanz: 50 W Antenna typ: Patch-Resonator-Antenna max. power: 20 W HF-connection: N(f) connector

Directional Antenna / Sectorstrahler Monoband transmitting and receiving antenna for infrastruktur use Monoband Sende- und Empfangsantenne / Infrastruktur Polarization: Linear Radiation characteristics: Directional Gain: 10 dBi typ. VSWR: Ł 2 typ. Impedanz: 50 W Antenna typ: Patch-Resonator-Antenna max. power: 20 W HF-connection: N(f) connector

GSM Directional Antenna

Directional Antenna / Sectorstrahler Monoband transmitting and receiving antenna for infrastruktur use Monoband Sende- und Empfangsantenne / Infrastruktur Polarization: Linear Radiation characteristics: Directional Gain: 10 dBi typ. VSWR: Ł 2 typ. Impedanz: 50 W Antenna typ: Patch-Resonator-Antenna max. power: 20 W HF-connection: N(f) connector

Extension coaxial cable with impedance 50 Ohm.

Suitable for GSM repeaters and antennas. Terminated with N (m) connectors.

Technical parameters:

Internal conductor: Ř 2.70 mm Cu

Dielectric: Ř 7.20 mm PEE gas

Outer foils: CuPet 20-23 100%

Braid: Ř 7.80 mm CuSn

Braid coverage: 50%

Jacket: Ř 10.30 mm PV

Mechanical properties: Min.poloměr bend: 50/100 mm

Weight: 139.2 kg / km

Electrical properties: Impedance: 50 ± 2 ©

Capacity: 80 ± 2 pF / m

Shortener: 83%

Efficiency shielding:> 90 dB

Attenuation and Max.power at 20 ° C: 30 MHz - 2,1 dB/100m - 3,36 kW

762-TNC pin crimping RG58 – angular

763-TNC pin schism RG58-straight

The GSM hub is suitable for branching GSM signals within the building into more self-separated rooms.  

Coaxial cable RF240 6GHz with N-Male / SMA-Female terminals of 1m code 689

Coaxial cable RF240 N-Male / SMA-Female length 1m

Coaxial cable RF240 6GHz with N-Male / SMA-Female terminals of 1m code 689

Suitable for VF technology according to your destination. Quality factory professional design, koax tested. 100% connector design.

Coaxial cable RF240 6GHz with N-Male / N-Female terminals of length 10m code 688

Coaxial cable RF240 N-Male / N-Female length 10m

Coaial cable RF240 6GHz with N-Male / N-Female terminals of 10m code 688

Suitable for GSM amplifiers for the extension of outdoor or indoor antenna. It includes N-Male/N-Female so it's virtually versatile, but you don't have multiple connectors on one VF route. Quality factory professional design, koax tested. 100% connector design.

Coaxial cable RF240 6GHz with N-Male / N-Male terminals of length 20m code 684

Coaxial cable RF240 N-Male / N-Male length 20m

Coaxial cable RF240 6GHz with N-Male / N-Male terminals of length 20m code 684

Suitable for GSM amplifiers for the possibility of extending the interior antenna. Quality factory professional design, koax tested. 100% connector design.

Coaxial cable RF240 6GHz with N-Male / N-Male terminals of length 30m code 686

Coaxial cable RF240 N-Male / N-Male length 30m

Coaxial cable RF240 6GHz with N-Male / N-Male terminals of length 30m code 686

Suitable for GSM amplifiers for the possibility of extending the interior antenna. Quality factory professional design, koax tested. 100% connector design.

Omnidirectional ceiling antenna for GSM 900/1800 MHz band. Band: 824 - 2500 MHz, Gain: 3/5 dB

Omnidirectional ceiling antenna for gsm 900/1800 MHz - UFO band.

The most common use is as an internal antenna for GSM signal amplifiers in a given band. Ideal for installation in cassette ceilingceilings.

These high performance directional couplings support internal/external applications in GSM, DCS and 3G bands up to 2500 MHz. Each steam unit defined the fraction of a powerful mobile signal with minimal reflections or losses. 

The wide frequency range allows use with multiband antennas, radiating cable systems, and wireless base stations. 

The dispositional loss was as small as possible and reliability strengthened. Each directional binding member comes with mounting hardware for easy wall mounting or mast.

The performance range of attenuating cells is available in ratings of 10,25,50 and 100Watts, and are available in attenuation factors 1,2,3,4,5,6,7,8,9,10,20 and 30dB.

To fasten these devices are arranged in such a way as to allow flexibility for inclusion in all types of equipment. A wide range of alternative motherboards can be offered with drilled holes and tapped according to customer requirements.