Wb Menu
Hybrid clutch merge designed to meet the specific wireless market needs most commonly used to combine two mobile operators on one feed antenna and cable.
This requires the termination of one output port in 50 ohms, and results in a loss of 3 dB in each signal. In situations where two similar feeds are necessary, for example in the building of applications, both outputs can be used, eliminating the need for termination and 3 dB losses.
Safe shopping
Fast delivery
Hassle-free return of goods
57 tax excl.
Hybrid clutch merging designed to meet specific wireless market needs
3dB Hybird Module 407
Hybrid clutch merge designed to meet the specific wireless market needs most commonly used to combine two mobile operators on one feed antenna and cable.
This requires the termination of one output port in 50 ohms, and results in a loss of 3 dB in each signal. In situations where two similar feeds are necessary, for example in the building of applications, both outputs can be used, eliminating the need for termination and 3 dB losses.
-Multiband Design for GSM, CDMA, DCS and UMTS
Maximize-isolation in wireless bands and minimizes passive inter-modulation (PIM)
-25 DB insulation (minimum), low PSV
Combines non-coherent signals
-200 Watt average consumption
N-Female connector or 7-16 DIN connector
-High reliability
Hybrid couplers are designed to meet the specific needs of the wireless market, which most commonly used to combine two wireless carriers to a single antenna feed or cable.
This requires the termination of one output port in 50 ohms, and results in a 3 dB loss in each signal. In situations where two similar feeds are required—for example, in-building applications—both outputs may be used, eliminating the need for a termination and the 3 dB loss.
-Multiband Design for GSM, CDMA, DCS and UMTS
-Maximize isolation in the wireless bands and minimize passive inter-modulation (PIM)
-25 dB isolation (minimum), low VSWR
-Combines non-coherent signals
-200 watt average power rating
-N Female connector or 7-16 DIN connector
-High reliability
Specific References
Hub/splitter with four outputs. Suitable for GSM repeater if needed multiple antennas for internal distribution. It is equipped with five N(f) connectors.
The performance range of attenuating cells is available in ratings of 10,25,50 and 100Watts, and are available in attenuation factors 1,2,3,4,5,6,7,8,9,10,20 and 30dB.
To fasten these devices are arranged in such a way as to allow flexibility for inclusion in all types of equipment. A wide range of alternative motherboards can be offered with drilled holes and tapped according to customer requirements.
Coaxial cable RF240 6GHz with N-Male / N-Male terminals of length 30m code 686
Coaxial cable RF240 N-Male / N-Male length 30m
Coaxial cable RF240 6GHz with N-Male / N-Male terminals of length 30m code 686
Suitable for GSM amplifiers for the possibility of extending the interior antenna. Quality factory professional design, koax tested. 100% connector design.
The GSM hub is suitable for branching GSM signals within the building into more self-separated rooms.
Hub/splitter with two outputs. Suitable for GSM repeater if needed multiple antennas for internal distribution. It is set with three N(f) connectors.
Directional Antenna / Sectorstrahler Monoband transmitting and receiving antenna for infrastruktur use Monoband Sende- und Empfangsantenne / Infrastruktur Polarization: Linear Radiation characteristics: Directional Gain: 10 dBi typ. VSWR: Ł 2 typ. Impedanz: 50 W Antenna typ: Patch-Resonator-Antenna max. power: 20 W HF-connection: N(f) connector
GSM Directional Antenna
Directional Antenna / Sectorstrahler Monoband transmitting and receiving antenna for infrastruktur use Monoband Sende- und Empfangsantenne / Infrastruktur Polarization: Linear Radiation characteristics: Directional Gain: 10 dBi typ. VSWR: Ł 2 typ. Impedanz: 50 W Antenna typ: Patch-Resonator-Antenna max. power: 20 W HF-connection: N(f) connector
Attenuating cells are available in ratings of 10,25,50 and 100Watts, and are available in attenuation factors 1,2,3,4,5,6,7,8,9,10,20 and 30dB.
The range of attenuating cells is available in ratings of 10,25,50 and 100Watts, and are available in attenuation factors 1,2,3,4,5,6,7,8,9,10,20 and 30dB.
To fasten these devices are arranged in such a way as to allow flexibility for inclusion in all types of equipment. A wide range of alternative motherboards can be offered with drilled holes and tapped according to customer requirements.
Omnidirectional ceiling antenna for GSM 900/1800 MHz band. Band: 824 - 2500 MHz, Gain: 3/5 dB
Omnidirectional ceiling antenna for gsm 900/1800 MHz - UFO band.
The most common use is as an internal antenna for GSM signal amplifiers in a given band. Ideal for installation in cassette ceilingceilings.
Coaxial cable RF240 6GHz with N-Male / N-Male terminals of length 20m code 684
Coaxial cable RF240 N-Male / N-Male length 20m
Coaxial cable RF240 6GHz with N-Male / N-Male terminals of length 20m code 684
Suitable for GSM amplifiers for the possibility of extending the interior antenna. Quality factory professional design, koax tested. 100% connector design.
external or internal directional antenna,
broadband 806-960MHz profit 7.5 dBi
GSM/DSC/UMTS antenna is a panel, directional antenna used in cooperation with GSM amplifiers (repeaters) AT500A, AT600A, AT608A, AT700A, AT800A...
The antenna is characterized by a gain of 7.5 dBi in the 806-960 MHz band and 10 dBi in the 1710-2500 MHz band, making it ideal for GSM, DCS and 3G amplifiers, whether for indoor or outdoor use.
Hub/splitter with three outputs. Suitable for GSM repeater if needed multiple antennas for internal distribution. It is equipped with four N(f) connectors.
Omnidirectional ceiling antenna for GSM 900/1800 MHz band. Band: 824 - 2500 MHz, Gain: 3/5 dB
Omnidirectional ceiling antenna for gsm 900/1800 MHz - UFO band.
The most common use is as an internal antenna for GSM signal amplifiers in a given band. Ideal for installation in cassette ceilingceilings.
The load range of the resistors termination is designed to provide an economic solution to the ever growing need for a compact, robust and easy end suitable for bench or filed use. Coaxial loads either to use a silent resistance chip or rod resistor depending on the desired power.
Black anodized aluminum alloy heat sinks are used for maximum thermal radiation with Type N connectors, however, additional connectors can be offered to meet the specific requirements of customers.
This series of endings are a medium power coaxial load that operates from DC to 2.5 GHz. Cooling ribs minimize temperature rise. The finishing element is enclosed in carefully enclosed coaxial housing. Standard connectors N and 7-16 DIN male or female.
