Audio transmitter designed as a board with surface mounting protected by a plastic cover. The power supply forms a frame and is located on the back of the printed circuit of the board.
The product is designed to transmit audio signals through a radio channel. You insert a flashlight and you can eavesdrop on your interest room within 100m.
Audio transmitter designed as a board with surface mounting protected by a plastic cover. The power supply forms a frame and is located on the back of the printed circuit of the board.
The product is equipped with a built-in microphone and an external antenna.
The product starts working as soon as it installs the battery in the power frame with the positive pole up. As accessories, it is necessary to purchase the accessories, the scanner from the menu in the same frequency band.
811-DIKS012 Crystal-Controlled Audio Transmitter
The product is rated for the audio intelligence via radio channel.
Transmitter is designed as a printed-circuit board with surface buildup protected with a plastic cover. The power supply frame is located on the rear side of the printed-circuit board.
The product is equipped with built-in microphone and external antenna.
The product starts operating as soon as the battery is installed into the power supply frame with its positive field up.
SPECIFICATIONS:
Frequency 416.5 – 423.5 MHz
Modulation WFM
Approximate range of transmission
(sensitivity 1 (V at signal/noise 12 dB)
100 m
Dimensions (without antenna) Diameter 30 x 7 mm
Antenna External
Power supply Internal, one European lithium cell CR2450
35 x 12 x 3.5mm
35 x 12 x 3.5mm
64 x 15 x 10 mm
Dimensions 51 x 13 x 6 mm
(2 x 1.5 V V625)
No less 6 hours
Transmitter length Approx. 375 mm