Outdoor control for obstacle light CM-DKW

The use:

For the CM-DKM air obstacle, the external controller is suitable for synchronizing all series of air obstacles of our company.

flashing work and monitor the functional state of the light. This product is an indoor type, can use waterproof grade IP65 directly to the outdoor environment.

Features:

• Use steel casing and spraying techniques, corrosion resistance, anti-UV.
• The voltage of the power circuit and the signal control line is the same, so the connection of the wires is simple and reliable, it will not cause damage to the lights and the controller if the fault line is connected for a short time.
• The control circuit uses MCU control, it can simultaneously control 2000W load power / up to 100 units of air obstacles, lights flashing synchronously or constantly.
• The controller has 3 types of operating modes: automatic, manual, closing.

1) Automatic mode: automatic shutdown during the day, shutdown of the aviation light control output; automatically turn on the open light control output in aviation at night.

2) Working in manual mode: the working state is forced open

3) Work closing mode: the working state is forcibly closed, three operating modes can be switched by the user.

• The controller can also adapt the fault alarm function when one of the lights it controlled has failed, the indicator on the controller can be displayed, it can also use dry contacts to alarm the external environment
• The function of this driver Market.sk Slovakia is very strong, the performance is reliable and safe. Use and maintenance is simple and convenient; and with surge protection (against lightning In15KA / 5 times, Imax 40KA), can be applied to poor working environments.