Continuous live viewing
Vibrating ringing mode allows continuous live monitoring. If a RF Palladium C40 signal is detected, it shall be confirmed if a hearing device, such as a modified mobile phone, is in use.
High frequency and low energy detection
2 Band Palladium receiver with optional antennas has excellent detection capabilities of high frequencies, and lower power transmitters including RF devices working on telephone wires. Palladium C40 also recognizes repeating signals and tracking systems.
Camera optics detection
Through conducting a search on a suspicious area with a Palladium C40 any camera, whether in use or sleeping, wired or with an RF link, will be found. Suspicious areas in a room or building are probed with five optional optical frequency speeds to locate photographic devices hidden from view.
Compact 2 band pocket RF receiver
Nezistiteľné tichý RF sweep
Vibration notification mode for RF device location
Listen to device confirmation devices
Voliteľné HF a LF antény
Performance and features of much larger systems
Detects modified mobile phones, repeat stations and tracking systems
Detection of the optics of hidden cameras
Test transmitter for RF adjustment
Technical description:
RF detection capability
all types of transmitters including AM, WFM, NFM, sub carrier, carrier only, SSB, DSBSC, mixed, frequency jumping and other types of spectrum expansion.
Mobile phone: GSM900, GSM1800 (ASM phase 2+), 3G, voice, fax, data, SMS and GPRS
Frequency coverage 10 MHz - 12 GHz
HF zisk > 40 dB; s predzosilňovačom> 50 dB
Vstupná RF impedance 50 ohmov
Zisk AF po detekcii 30 dB
Vastupná impedance 8 ohmov
Output power 200 mW
Citlivosť -55 DBM
Dynamic range > 60 dB
Camera detection
All optics cameras, in use or dormant
Physical
Operating modes
RF: on/off, detect, confirm vibrating ringtones
Optics: off, reveal.
Management
RF: 1 band, band 2 selection, volume, mute selection, high and low antenna frequency selection. Sensitivity: The tuning knob sets the basic sensitivity level. vibrating ringtone (rotary switch)
Optics: 5 optional optical price frequencies
Indicators
RF: LED on, signal strength (6),
high and low frequency selection,
low volume indicator, mute indicator,
low battery. Audio: Tone from internal speaker or headset beep (not supplied).
Optics: visual aperture detection
Audio output connectors
internal speaker
Headphone socket (3.5 mm jack)
Power supply 9V, PP3 battery
Size 145 x 70 x 24 mm
Weight 314 g (with battery)
Operating temperature range -10 To + 65 ° C,
Case content
RF and optics camera detector
Antenna
High frequency, low frequency
Accessories
Test transmitter; Handset
Power supply
PP3 9 V battery and connector
Robust with foam cutout
