Radio stethoscope RSK 010

Complete audio surveillance through the walls. Comprehensive cable set for listening through the wall. Up to 5 walls can be monitored at the same time.

If your target is on the other side of a solid wall even under poor surveillance conditions, you can listen locally or remotely with a high degree of flexibility for temporary or permanent monitoring using this sophisticated amplifier and accelerometer.

Exact location of the target

The accelerometer and 2 channels of the control unit with instant stereo display more than 12 meters apart give exact information about what is happening on the other side of the wall. Microphone sensitivity level is adjustable on each (stereo) channel.

Multichannel surveillance. easy to use LCD display allows viewing operator to monitor up to eight channels. On-screen information includes channel identification, signal strength and status (battery transmitter level, on/off) that supports successful monitoring of traffic. When recording tracking activity is needed EPR is equipped with recording output device.

Digital system with remote control

Using the controls on the receiver, the operator can switch between continuous, VOX and off modes, and change the output power setting on each transmitter. This robust receiver is powered by a network adapter or internal rechargeable batteries that provide up to 8 hours of operation. The system includes a magnetic mount antenna of the vehicle.

Digital Burst Transmitter with Remote Control

The Digital Burst Sensor is designed to impact the transmission of audio data through an RF controller.

The system has high protection against detection complexes of radio monitoring indicators and fields and provides high quality sound transmission.

This system is based on the accumulation of audio data into the internal memory of the transmitter and its subsequent transmission in short compressed packets at high speed. The receiver performs the opposite procedure: receives high-speed compressed packets, corrects errors, stitches packets together, and converts them from digital to analog format.

This product is intended for the control and transmission of acoustic information via a radio channel.

The transmitter is designed to control acoustics and transmit acoustic information via a radio channel.

Transmission of acoustic information via a two-wire unshielded cable.

Multifunctional wireless FF audio sound system. Flexible, long-range supervision.

Listening through walls

Powerful and versatile, the technology breaks new ground with its ability to operate on highly sensitive and critical operations. The device comes with a multi-function device for listening through walls using a contact or needle, microphones for the phone, or room and telephone operations, and for use with when worn on the body microphone.

Clear or encrypted, powerful and versatile

With the ability to choose a clear or encrypted mode, high or low microphone sensitivity (it registers the type of microphone connected) and voice control with on/off for longer battery life, the operator has a very versatile and compact unit

The product is designed to control acoustics and transmit acoustic information via a radio channel.

The acoustic information transmission set is intended for controlling the acoustics of a room with information transmission via a 220 V network on auxiliary carriers.

This set is designed for covert audio monitoring with covert transmission of audio information via a radio channel and with the possibility of remote control of the radio channel.

This product is designed to control acoustic information transmitted over a digital radio channel.

Transmission of acoustic information via a two-wire unshielded cable.

The recorder is designed to control and record acoustic information obtained using a small accelerometer (stethoscope sensor) through the elements of building structures (wall, ceiling, etc.), or using a remote cable microphone (cable length up to 10 km).

• Analogue radio channel.
• Powered by built-in rechargeable batteries.
• Wireless battery charging (except "FOLDER").
• Concealed magnetic switch (except "FOLDER").
• The frequency range is 416.5 - 423.5 MHz.

The product is designed to control acoustics and transmit acoustic information via a radio channel from mobile objects with an integrated power supply network.

• RMTK 500DU - information transmitter module with remote control.
• RMTK 500DDU - information transmitter module with digital channel closure and remote control.