USB MIXING PROGRAMMING CABLE

The load range of the resistors termination is designed to provide an economic solution to the ever growing need for a compact, robust and easy end suitable for bench or filed use. Coaxial loads either to use a silent resistance chip or rod resistor depending on the desired power.

Black anodized aluminum alloy heat sinks are used for maximum thermal radiation with Type N connectors, however, additional connectors can be offered to meet the specific requirements of customers.

Directional Antenna / Sectorstrahler Monoband transmitting and receiving antenna for infrastruktur use Monoband Sende- und Empfangsantenne / Infrastruktur Polarization: Linear Radiation characteristics: Directional Gain: 10 dBi typ. VSWR: Ł 2 typ. Impedanz: 50 W Antenna typ: Patch-Resonator-Antenna max. power: 20 W HF-connection: N(f) connector

Alinco EDC36 12V car napajaci product for Alinco..

Alinco EDC36 Lighter Cable with Noise Filter

Lighter filter cable for all Alinco Handheld transceivery (except DJ-C6/C7 and DJ-S45/CJ-175 series). Also fits DJ-X3/X10/X2000 and V series.

Alinco EDC36 Lighter Cable with Noise Filter - 141

Lighter cable with filter for all Alinco Handheld transceivery (except DJ-C6/C7 and DJ-S45/CJ-175 series). Also fits DJ-X3/X10/X2000 and V series.

Alinco ALINCO EDC-36 DC noise filter cable EDC-36 DC

12 V lighter cable with Noise Filter suitable for all ALINCO handheld radios and these scanners: DJ-X3, DJ-X10, DJ-X2000

The AS60 / 1522 stereo spectrum analyzer is very rhythmic, accurate, dynamic, has a concise appearance and high accuracy of a music visualizer.

Frequency: 144/430/900MHz

- Color: black 

- plastic housing and copper cable 

- Frequency: 144/430/900MHz 

- Profit: 3.5dBi (430MHz) 

- Maximum power: 10W 

- Impedance: 50 ohm 

- Connector type: SMA

Voltmeter – ampere meter DC 0A-20A, as well as 6V-100V, including measurement of consumption

The DS3000A antenna is designed to receive the entire frequency range of 75MHz to 3000MHz (3GHz) Discon employs a compact configuration. It is small and relatively light design is ideal for installation in a confined space, for example, apartment balcony.

Includes 10 m (32.8 feet) low loss RG58 / U coaxial cable terminated in N connector for radio connection (broadband receiver, scanner). This antenna is designed and manufactured in Japan to exacting standards. Connect to any standard (20-30mm diameter) mast supplied with two U-bolts.

The DS3000A can also be used for transmission on 144, 430, 904 and 1200 MHz amateur bands (up to 50 watts).

These high performance directional couplings support internal/external applications in GSM, DCS and 3G bands up to 2500 MHz. Each steam unit defined the fraction of a powerful mobile signal with minimal reflections or losses. 

The wide frequency range allows use with multiband antennas, radiating cable systems, and wireless base stations. 

The dispositional loss was as small as possible and reliability strengthened. Each directional binding member comes with mounting hardware for easy wall mounting or mast.

This high linear preamplifier has been developed for use in the IFF (Identification Friend or Foe) frequency range at 1090 MHz. The preamplifier has a two-pole band pass between two amplifier stages for high suppression of out-of-band signals. This preamplifier is characterized by excellent high signal performance and low noise number.

Attenuating cells are available in ratings of 10,25,50 and 100Watts, and are available in attenuation factors 1,2,3,4,5,6,7,8,9,10,20 and 30dB.

The range of attenuating cells is available in ratings of 10,25,50 and 100Watts, and are available in attenuation factors 1,2,3,4,5,6,7,8,9,10,20 and 30dB.

To fasten these devices are arranged in such a way as to allow flexibility for inclusion in all types of equipment. A wide range of alternative motherboards can be offered with drilled holes and tapped according to customer requirements.

Stab. Source 13v/20A suitable for radio stations.

Lightweight and compact, for radio purposes, output with fixed 13.5 V / 25A, unseeded 20mV.

Omnidirectional antenna AOR DA3200 - Frequency range: 25-3000 MHz

Icom BC-144-21 is a motherboard fast charger designed for Ni-Cd or Ni-MH batteries. It comes with a 120 VAC BC145A wall adapter. It also includes an AD99 insert. The orientation of this spacer allows you to charge the battery itself, or connected to the V8.

Icom BC-144-21 has built-in LEDs that glow orange during fast charging (700 mA) or green when fast charging doesn't end. While the LED is green it will continue to recharge (30 mA). The battery must be removed from the charger to stop charging. Always remove after 15 hours.

Frequency range 50 to 5000 MHz,

impedance of 50 ohms,

VF broadband amplifier 50 to 5000 MHz

430MHz - 440MHz Vehicle magnetic antenna.