SPEAKER MIC 12MM K PLUG MIKROFÓN + SLUCHÁTKO + PTT

The load range of the resistors termination is designed to provide an economic solution to the ever growing need for a compact, robust and easy end suitable for bench or filed use. Coaxial loads either to use a silent resistance chip or rod resistor depending on the desired power.

Black anodized aluminum alloy heat sinks are used for maximum thermal radiation with Type N connectors, however, additional connectors can be offered to meet the specific requirements of customers.

ERW-8, USB programmer for DJ-X11 / DJ-FX446

Code: 480

Icom BC-144-21 is a motherboard fast charger designed for Ni-Cd or Ni-MH batteries. It comes with a 120 VAC BC145A wall adapter. It also includes an AD99 insert. The orientation of this spacer allows you to charge the battery itself, or connected to the V8.

Icom BC-144-21 has built-in LEDs that glow orange during fast charging (700 mA) or green when fast charging doesn't end. While the LED is green it will continue to recharge (30 mA). The battery must be removed from the charger to stop charging. Always remove after 15 hours.

Hard-packaging suitcases made of indestructible ABS material are stable and burdensome and offer optimal protection for your products.

Thanks to the special extrusion blowing technique, an air case between the inner and outer walls is created, ensuring even greater stability of the trunk against impacts. Thanks to the perfect presentation, the success of your products is guaranteed!

discone antenna for the UHF/L/S/C bands frequency range of 700MHz to 6GHz (6,000MHz).

This high linear preamplifier has been developed for use in the IFF (Identification Friend or Foe) frequency range at 1090 MHz. The preamplifier has a two-pole band pass between two amplifier stages for high suppression of out-of-band signals. This preamplifier is characterized by excellent high signal performance and low noise number.

Voltmeter – ampere meter DC 0A-20A, as well as 6V-100V, including measurement of consumption

The DS3000A antenna is designed to receive the entire frequency range of 75MHz to 3000MHz (3GHz) Discon employs a compact configuration. It is small and relatively light design is ideal for installation in a confined space, for example, apartment balcony.

Includes 10 m (32.8 feet) low loss RG58 / U coaxial cable terminated in N connector for radio connection (broadband receiver, scanner). This antenna is designed and manufactured in Japan to exacting standards. Connect to any standard (20-30mm diameter) mast supplied with two U-bolts.

The DS3000A can also be used for transmission on 144, 430, 904 and 1200 MHz amateur bands (up to 50 watts).

Broadband mast pre-amp from 50 to 5000 MHz with excellent large signal rejection (IP3> 30dB) and low noise number, suitable for many applications: sensor, receiver or to increase the sensitivity of measuring instruments. Suitable also so low power amplifier with capacity up to 20 dBm output, amplification C. 20 dB, noise number c. 2 dB, N connectors, supply voltage 10 to 20V.

GSM Directional Antenna

Directional Antenna / Sectorstrahler Monoband transmitting and receiving antenna for infrastruktur use Monoband Sende- und Empfangsantenne / Infrastruktur Polarization: Linear Radiation characteristics: Directional Gain: 10 dBi typ. VSWR: Ł 2 typ. Impedanz: 50 W Antenna typ: Patch-Resonator-Antenna max. power: 20 W HF-connection: N(f) connector

These high performance directional couplings support internal/external applications in GSM, DCS and 3G bands up to 2500 MHz. Each steam unit defined the fraction of a powerful mobile signal with minimal reflections or losses. 

The wide frequency range allows use with multiband antennas, radiating cable systems, and wireless base stations. 

The dispositional loss was as small as possible and reliability strengthened. Each directional binding member comes with mounting hardware for easy wall mounting or mast.

Directional Antenna / Sectorstrahler Monoband transmitting and receiving antenna for infrastruktur use Monoband Sende- und Empfangsantenne / Infrastruktur Polarization: Linear Radiation characteristics: Directional Gain: 10 dBi typ. VSWR: Ł 2 typ. Impedanz: 50 W Antenna typ: Patch-Resonator-Antenna max. power: 20 W HF-connection: N(f) connector

Alinco EDC36 12V car napajaci product for Alinco..

Alinco EDC36 Lighter Cable with Noise Filter

Lighter filter cable for all Alinco Handheld transceivery (except DJ-C6/C7 and DJ-S45/CJ-175 series). Also fits DJ-X3/X10/X2000 and V series.

DDS signal source, can be the use of DC power supply 5V sinusated output, rectangular (the operating cycle can be 1% -99% setting), 

Frequency: 136 ~ 174 MHz / UHF: 400 ~ 470MHz

- Brand: Pryme 

- Color: black 

- Material: plastic + copper 

- frequency: VHF: 136 ~ 174 MHz / UHF: 400 ~ 470MHz 

- Profit: 3.2dBi / 5.6dBi 

- Maximum power: 10W 

- standing wave ratio (SWR): Less than 1.5 

- Impedance: 50 ohm 

- Length: 85 cm (max.), 28 cm (min.) 

- 2 sections 

- Connector type: SMA-male J 

- Suitable for Walkie Talkie Kenwood TH-G71A/TH-K2AT/K4AT, LT 61006200, 6288, 6600, 6100PLUS, 7700 (compatible with all SMA-J connectors)

Luxury digital dictaphone with capacity 4GB-064.

To which you can record 72 - 1120 hours of recording directly to MP3 format using a built-in or external microphone, as well as directly record the phone's calls from a landline !

FM radio, AGC and VOR optimization recording, clock, time setting option (timer), created records can be password protected, support playback of WMA and MP3 tracks, etc.

built-in speaker

mp3 recording with integrated and external microphones

timed record, password protection

AGC and VOR functions for automatic recording editing

write quality settings and recording mode

FM radio, FM recording, line-in recording

ID3 tag and lyric text support

MP3/ WMA playback support, integrated EQ