ERW-8, USB programmer for DJ-X11

The AS60 / 1522 stereo spectrum analyzer is very rhythmic, accurate, dynamic, has a concise appearance and high accuracy of a music visualizer.

This high linear preamplifier has been developed for use in the IFF (Identification Friend or Foe) frequency range at 1090 MHz. The preamplifier has a two-pole band pass between two amplifier stages for high suppression of out-of-band signals. This preamplifier is characterized by excellent high signal performance and low noise number.

Frequency: 136 ~ 174 MHz / UHF: 400 ~ 470MHz

- Brand: Pryme 

- Color: black 

- Material: plastic + copper 

- frequency: VHF: 136 ~ 174 MHz / UHF: 400 ~ 470MHz 

- Profit: 3.2dBi / 5.6dBi 

- Maximum power: 10W 

- standing wave ratio (SWR): Less than 1.5 

- Impedance: 50 ohm 

- Length: 85 cm (max.), 28 cm (min.) 

- 2 sections 

- Connector type: SMA-male J 

- Suitable for Walkie Talkie Kenwood TH-G71A/TH-K2AT/K4AT, LT 61006200, 6288, 6600, 6100PLUS, 7700 (compatible with all SMA-J connectors)

Voltmeter – ampere meter DC 0A-20A, as well as 6V-100V, including measurement of consumption

The load range of the resistors termination is designed to provide an economic solution to the ever growing need for a compact, robust and easy end suitable for bench or filed use. Coaxial loads either to use a silent resistance chip or rod resistor depending on the desired power.

Black anodized aluminum alloy heat sinks are used for maximum thermal radiation with Type N connectors, however, additional connectors can be offered to meet the specific requirements of customers.

This highly linear preamplifier has been developed for applications on the MFF frequency range (Identification Friend or foe) at 1090 MHz.

Low Noise Amplifier for SBS1

1070 ... 1100 MHz

This highly linear preamplifier has been developed for applications on the MFF frequency range (Identification Friend or foe) at 1090 MHz. This preamplifier is in a two-half band pass filter between two stages for amp high suppression out-of-band signals. This preamplifier excellent features great signal performance and low noise level figure.

Feature

High IP3 for excellent high signal performance

Low noise level image

ESD protection on the input preamplifier

Built-In distortion tee for remote power supply via coaxial cable

Built-In Band Pass Filter

Attenuating cells are available in ratings of 10,25,50 and 100Watts, and are available in attenuation factors 1,2,3,4,5,6,7,8,9,10,20 and 30dB.

The range of attenuating cells is available in ratings of 10,25,50 and 100Watts, and are available in attenuation factors 1,2,3,4,5,6,7,8,9,10,20 and 30dB.

To fasten these devices are arranged in such a way as to allow flexibility for inclusion in all types of equipment. A wide range of alternative motherboards can be offered with drilled holes and tapped according to customer requirements.

Frequency: 144 ~ 430MHz

- Frequency: 144 ~ 430MHz 

- Profit: 2,15 dB 

- Maximum power: 100WATTS 

- standing wave (VSWR): less 1,5 

- Impedance: 50 ohm 

- length: 210 mm 

- Connector type: SMA female

Directional Antenna / Sectorstrahler Monoband transmitting and receiving antenna for infrastruktur use Monoband Sende- und Empfangsantenne / Infrastruktur Polarization: Linear Radiation characteristics: Directional Gain: 10 dBi typ. VSWR: Ł 2 typ. Impedanz: 50 W Antenna typ: Patch-Resonator-Antenna max. power: 20 W HF-connection: N(f) connector

Alinco EDC36 12V car napajaci product for Alinco..

Alinco EDC36 Lighter Cable with Noise Filter

Lighter filter cable for all Alinco Handheld transceivery (except DJ-C6/C7 and DJ-S45/CJ-175 series). Also fits DJ-X3/X10/X2000 and V series.

430MHz - 440MHz Vehicle magnetic antenna.

Hard-packaging suitcases made of indestructible ABS material are stable and burdensome and offer optimal protection for your products.

Thanks to the special extrusion blowing technique, an air case between the inner and outer walls is created, ensuring even greater stability of the trunk against impacts.

Software for UNIDEN UBC3500XLT, VERSION BASIC, full licensed version. ARC3500

Software for UNIDEN UBC3500XLT, VERSION BASIC, full licensed version.

ARC3500 includes the most versatile memory editor available on the market, our newly developed "smart system" browser technology makes navigation as easy as possible, and you can customize your browser. 

QuickKey overview: "Drag and Drop" your systems or groups in QuickKeys.

Copy/Paste group between systems, building new systems has never been so easy!

Importing data from CSV/UASD files

Uniden USB1 PC cable is now also available in Europe.

"Intelli-upload ': Replaces systems that are stored in the scanner without having to reset your scanner first!

Icom BC-144-21 is a motherboard fast charger designed for Ni-Cd or Ni-MH batteries. It comes with a 120 VAC BC145A wall adapter. It also includes an AD99 insert. The orientation of this spacer allows you to charge the battery itself, or connected to the V8.

Icom BC-144-21 has built-in LEDs that glow orange during fast charging (700 mA) or green when fast charging doesn't end. While the LED is green it will continue to recharge (30 mA). The battery must be removed from the charger to stop charging. Always remove after 15 hours.

Alinco EDC36 Lighter Cable with Noise Filter - 141

Lighter cable with filter for all Alinco Handheld transceivery (except DJ-C6/C7 and DJ-S45/CJ-175 series). Also fits DJ-X3/X10/X2000 and V series.

Alinco ALINCO EDC-36 DC noise filter cable EDC-36 DC

12 V lighter cable with Noise Filter suitable for all ALINCO handheld radios and these scanners: DJ-X3, DJ-X10, DJ-X2000

Frequency: 144/430/900MHz

- Color: black 

- plastic housing and copper cable 

- Frequency: 144/430/900MHz 

- Profit: 3.5dBi (430MHz) 

- Maximum power: 10W 

- Impedance: 50 ohm 

- Connector type: SMA