ARC3500 ,SOFTWARE BUTEL FOR UBC3500XLT -586

The load range of the resistors termination is designed to provide an economic solution to the ever growing need for a compact, robust and easy end suitable for bench or filed use. Coaxial loads either to use a silent resistance chip or rod resistor depending on the desired power.

Black anodized aluminum alloy heat sinks are used for maximum thermal radiation with Type N connectors, however, additional connectors can be offered to meet the specific requirements of customers.

Stab. Source 13v/20A suitable for radio stations.

Lightweight and compact, for radio purposes, output with fixed 13.5 V / 25A, unseeded 20mV.

Hard-packaging suitcases made of indestructible ABS material are stable and burdensome and offer optimal protection for your products.

Thanks to the special extrusion blowing technique, an air case between the inner and outer walls is created, ensuring even greater stability of the trunk against impacts. Thanks to the perfect presentation, the success of your products is guaranteed!

Frequency: 144 ~ 430MHz

- Frequency: 144 ~ 430MHz 

- Profit: 2,15 dB 

- Maximum power: 100WATTS 

- standing wave (VSWR): less 1,5 

- Impedance: 50 ohm 

- length: 210 mm 

- Connector type: SMA female

Frequency: 136 ~ 174 MHz / UHF: 400 ~ 470MHz

- Brand: Pryme 

- Color: black 

- Material: plastic + copper 

- frequency: VHF: 136 ~ 174 MHz / UHF: 400 ~ 470MHz 

- Profit: 3.2dBi / 5.6dBi 

- Maximum power: 10W 

- standing wave ratio (SWR): Less than 1.5 

- Impedance: 50 ohm 

- Length: 85 cm (max.), 28 cm (min.) 

- 2 sections 

- Connector type: SMA-male J 

- Suitable for Walkie Talkie Kenwood TH-G71A/TH-K2AT/K4AT, LT 61006200, 6288, 6600, 6100PLUS, 7700 (compatible with all SMA-J connectors)

Omnidirectional antenna AOR DA3200 - Frequency range: 25-3000 MHz

Hard-packaging suitcases made of indestructible ABS material are stable and burdensome and offer optimal protection for your products.

Thanks to the special extrusion blowing technique, an air case between the inner and outer walls is created, ensuring even greater stability of the trunk against impacts.

This high linear preamplifier has been developed for use in the IFF (Identification Friend or Foe) frequency range at 1090 MHz. The preamplifier has a two-pole band pass between two amplifier stages for high suppression of out-of-band signals. This preamplifier is characterized by excellent high signal performance and low noise number.

Voltmeter – ampere meter DC 0A-20A, as well as 6V-100V, including measurement of consumption

The load range of the resistors termination is designed to provide an economic solution to the ever growing need for a compact, robust and easy end suitable for bench or filed use. Coaxial loads either to use a silent resistance chip or rod resistor depending on the desired power.

Black anodized aluminum alloy heat sinks are used for maximum thermal radiation with Type N connectors, however, additional connectors can be offered to meet the specific requirements of customers.

This series of endings are a medium power coaxial load that operates from DC to 2.5 GHz. Cooling ribs minimize temperature rise. The finishing element is enclosed in carefully enclosed coaxial housing. Standard connectors N and 7-16 DIN male or female.

Frequency range 50 to 5000 MHz,

impedance of 50 ohms,

VF broadband amplifier 50 to 5000 MHz

The DS3000A antenna is designed to receive the entire frequency range of 75MHz to 3000MHz (3GHz) Discon employs a compact configuration. It is small and relatively light design is ideal for installation in a confined space, for example, apartment balcony.

Includes 10 m (32.8 feet) low loss RG58 / U coaxial cable terminated in N connector for radio connection (broadband receiver, scanner). This antenna is designed and manufactured in Japan to exacting standards. Connect to any standard (20-30mm diameter) mast supplied with two U-bolts.

The DS3000A can also be used for transmission on 144, 430, 904 and 1200 MHz amateur bands (up to 50 watts).

Frequency: 144/430/900MHz

- Color: black 

- plastic housing and copper cable 

- Frequency: 144/430/900MHz 

- Profit: 3.5dBi (430MHz) 

- Maximum power: 10W 

- Impedance: 50 ohm 

- Connector type: SMA

The performance range of attenuating cells is available in ratings of 10,25,50 and 100Watts, and are available in attenuation factors 1,2,3,4,5,6,7,8,9,10,20 and 30dB.

To fasten these devices are arranged in such a way as to allow flexibility for inclusion in all types of equipment. A wide range of alternative motherboards can be offered with drilled holes and tapped according to customer requirements.

Attenuating cells are available in ratings of 10,25,50 and 100Watts, and are available in attenuation factors 1,2,3,4,5,6,7,8,9,10,20 and 30dB.

The range of attenuating cells is available in ratings of 10,25,50 and 100Watts, and are available in attenuation factors 1,2,3,4,5,6,7,8,9,10,20 and 30dB.

To fasten these devices are arranged in such a way as to allow flexibility for inclusion in all types of equipment. A wide range of alternative motherboards can be offered with drilled holes and tapped according to customer requirements.

PC interface USB cable for USC230/UBC3500XLT

USB cable-587 to PC PRO UNIDEN UBC3500 & USC230 SCANNERS

PC interface USB cable for USC230/UBC3500XLT

PC Cable to connect the scanner to the PC. The connection cable connects directly to the USB port to the computer and the USC-230E or UBC-3500XLT.

The SOFTWARE ARC3500 ,BUTEL software for UBC3500XLT is also on offer.