DDS signal source, can be the use of dc power supply 5V sinus from 0.01 Hz-2MHz
This is a full DDS signal source, the use of dc 5V sine output power can be rectangular (the operating cycle can be 1%-99% setting), triangle wave, and sawmilling variety of features offered, such as curves, maximum power up to 10Vppfrequency from 0.01 Hz-2MHz resolution to 10MHz has both ttl sync output and 60MHz frequency counter function three functions in one.
- Features:
- High frequency resolution: 0.01 Hz
- High frequency Accuracy: ± 20ppm
- Low distortion: <1%
- Rectangular operating cycle of 1% to 99% accurate adjustment
- Triangular wave modulation moderation output two saw
- Variable DC control levels
- External Frequency Measurement
- Default stored frequency, transferred
- Interface
- Output signal function (main signal output)
- TTL output
- External reading input
- Technical indicators:
- Main output of the course of the sinus, rectangle, triangle waves, hacksaw
- Maximum output amplitude of 10Vpp (without load)
- Output impedance 50Ω ± 10%
- DC bias ± 5V (without load)
- Operating cycle range 1% -99% (rectangular course)
- LCD 1602 display
- Output frequency:
- Sine 0.01 Hz-2MHz
- Rectangular 0.01 Hz-1MHz (valid range)
- Wave triangle 0.01 Hz-1MHz (valid range)
- Saw 0.01 Hz ~ 1MHz (valid range)
- Resolution 0.01 Hz
- Frequency stability ± 1 × 10-6
- Error frequency ± 5 × 10-6
- Sine Wave distortion <1% (reference frequency is 1 kHz)
- Linearity triangular waves ≥ 98%, 0,01 Hz ~ 100 kHz;
- ≥ 95%, 100kHz ~ 1MHz;
- Rectangular Rise and Fall Times <30ns
- TTL output TTL level ≥ 3 Vp-p
- With carrying capacity of 20TTL load
- Outside the measurement function:
- Frequency range: 1Hz-60MHz
- Signal amplitude: 0.5Vpp-20Vpp
- Out of counting range: 0 -4294967296
- memory of 10 times
