Local heat recovery unit suitable for ventilation

Non-contact liquid level sensor module - Waterproof sensor Water level detector for 20 mm vessel wall

The intelligent non-contact liquid level sensor is used to determine if there is liquid in the pipe / container. It changes the state of the output when it is detected that liquid is passing through the measured object.

Digital thermostat for direct boiler switching 940-03H/19-spin + WiFi. Full replacement of older thermostats for connection to the boiler - full replacement of Auraton 2020

The WiFi room thermostat is used to control room temperature based on the set or set heating mode. This increases the temperature comfort of the room and reduces the cost of heating the building. The thermostat allows remote control via the Internet and away from home.

The WiFi room thermostat is used to control room temperature based on the set or set heating mode. This increases the temperature comfort of the room and reduces the cost of heating the building. The thermostat allows remote control via the Internet and away from home.

 NEW THERMOSTAT 2020

Temperature measurement with resolution of 0,25°C, separate programming Saturday and Sunday, eight temperature levels, boiler operating clock counter, programmable hysteresis, econo timer, temper mode, time programming step is 1 minute Features Weekly program with resolution of working days , Saturdays and Sundays

The thermostat is equipped with a touch panel under the LCD for intuitive and easy operation without the need to study the manual. The thermostat fits into luxurious interiors and induces a hi-tech look.

Its main advantage is that the information from the thermostat is sold wirelessly on the central heating boiler, there is no need to install any connection cable.

AURATON 2020TXP NEW Wireless Digital Programmable Thermostat.

Its main advantage is that the information from the thermostat is sold wirelessly on the central heating boiler, there is no need to install any connection cable.

Another advantage is that it can be transferred from one room to another and thus regulates the temperature in the room where you are.

The set includes a transmitter and a receiver unit. The transmitter is in appearance and functionally the same as AURATON 2020, only the relay location contains a transmitting module at a frequency of 433,92 MHz.

The liquid level meter enables non-contact ultrasonic level measurement with a separate digital display. This level meter designed for flushing tanks (cesspool depth measurement) and rainwater tanks can be installed in a few minutes

Ultrazvukový snímač hladiny tekutín s LED zobrazovačom pre informačné zobrazenie výšky hladiny vody, odpadové vody, kaly aj sypkých materiálov. You can save money on your phone and WiFi.

Ultrasonic liquid level sensor with LCD display for accurate display of water level, waste water, sludge and bulk materials.

The digital underfloor heating thermostat uses advanced microcomputing chip control and a high sensor to control the temperature of electrical heating devices. Control the motor ball valve, motor valve, heat valve, solenoid valve, heater, electric heating film and electric carbon crystals.

The wireless digital surround thermostat is used to automatically control heating systems in apartments, houses and offices according to an adjustable time program.

The WiFi room thermostat is used to control room temperature based on the set or set heating mode. This increases the temperature comfort of the room and reduces the cost of heating the building. The thermostat allows remote control over the Internet and away from home.

The WiFi wireless room thermostat is used to control room temperature based on the set or set heating mode. This increases the temperature comfort of the room and reduces the cost of heating the building.

Flood sensors are designed to indicate fault states (e.g. water leakage) in exchange station, boiler rooms and similar facilities. They are powered according to type 24 V dc or AC voltage. The sensor is placed in a plastic housing suitable for direct wall mounting.

The sensor belongs to the category of conductive types of sensors. When connecting the electrodes located at the bottom of the sensor box with conductive medium, selected outputs are activated, fault signals are sent to the parent system and the red LED inside the device is lit.

A small air system that will also save your home heat that escapes with classic ventilation. The outdoor fresh air is separately heated from the rising warm exhaled air with an efficiency of up to 70% ! And the ground ventilation!

Currently, most new buildings are airtight. During renovations, most joints and airs are sealed to avoid unwanted heat leakages. However, this prevents the natural exchange of air in the rooms. In conjunction with this, however, there is a lack of fresh air in the rooms, unpleasant odes accumulate and mold formation can occur. It is therefore necessary to ensure the exchange of air so as to minimise heat losses caused by ventilation.