Digital thermostat for direct boiler switching 940-03H/19-spin + WiFi.

The WiFi room thermostat is used to control room temperature based on the set or set heating mode. This increases the temperature comfort of the room and reduces the cost of heating the building. The thermostat allows remote control via the Internet and away from home.

Smart thermostat with WiFi control capability. With PT32 TvFi for smartphones, your heating system can be fully controlled.

The thermostat can also be operated via a program in your PC WIN10. This is the latest version of VER 13.5+ power option with flashlights

Smart thermostat with WiFi control capability. With EOB PT-WiFi for smartphones, your heating system can be fully controlled not only over the Internet.

PT32 WiFi is a smart surround digital thermostat with implemented WiFi module and internal antenna. It is suitable for all boilers that require non-potent (voltageless) switching contacts (e.g. Gas boilers, electric boilers, circulators, thermoelectric drives or air conditioning units).

The liquid level meter enables non-contact ultrasonic level measurement with a separate digital display. This level meter designed for flushing tanks (cesspool depth measurement) and rainwater tanks can be installed in a few minutes

The digital underfloor heating thermostat uses advanced microcomputing chip control and a high sensor to control the temperature of electrical heating devices. Control the motor ball valve, motor valve, heat valve, solenoid valve, heater, electric heating film and electric carbon crystals.

The WiFi room thermostat is used to control room temperature based on the set or set heating mode. This increases the temperature comfort of the room and reduces the cost of heating the building. The thermostat allows remote control via the Internet and away from home.

A small air system that will also save your home heat that escapes with classic ventilation. The outdoor fresh air is separately heated from the rising warm exhaled air with an efficiency of up to 70% ! And the ground ventilation!

Currently, most new buildings are airtight. During renovations, most joints and airs are sealed to avoid unwanted heat leakages. However, this prevents the natural exchange of air in the rooms. In conjunction with this, however, there is a lack of fresh air in the rooms, unpleasant odes accumulate and mold formation can occur. It is therefore necessary to ensure the exchange of air so as to minimise heat losses caused by ventilation.

Level meter for liquid and bulk materials up to a depth of 5m, intended for granaries or concrete cesspools, self-supporting cesspools, durable fiberglass cesspools for waste water up to 5m, plastic cesspools for other liquids.

Ultrasonic liquid level sensor with LCD display for accurate display of water level, waste water, sludge and bulk materials.

Flood sensors are designed to indicate fault states (e.g. water leakage) in exchange station, boiler rooms and similar facilities. They are powered according to type 24 V dc or AC voltage. The sensor is placed in a plastic housing suitable for direct wall mounting.

The sensor belongs to the category of conductive types of sensors. When connecting the electrodes located at the bottom of the sensor box with conductive medium, selected outputs are activated, fault signals are sent to the parent system and the red LED inside the device is lit.

The main advantage of the thermostat is the wireless transmission of information from the transmitter to the receiver programmable thermostat consisting of a set of transmitter and receiver.

This is your advertised and already functional thermostat. So we guarantee its functionality.

The main advantage of the thermostat is the wireless transmission of information from the transmitter to the receiver. At the same time, the transmitter performs the function of a gramible thermostat with a weekly program. The receiver is located near the boiler and the transmitter can be mounted on the wall or loosely laid for example on the table (part of the practical armrest). Therefore, no connection cable is required.

Non-contact liquid level sensor module - Waterproof sensor Water level detector for 20 mm vessel wall

The intelligent non-contact liquid level sensor is used to determine if there is liquid in the pipe / container. It changes the state of the output when it is detected that liquid is passing through the measured object.

The liquid level meter enables non-contact ultrasonic level measurement with a separate digital display. This level meter designed for flushing tanks (cesspool depth measurement) and rainwater tanks can be installed in a few minutes

The wireless digital surround thermostat is used to automatically control heating systems in apartments, houses and offices according to an adjustable time program.

The WiFi room thermostat is used to control room temperature based on the set or set heating mode. This increases the temperature comfort of the room and reduces the cost of heating the building. The thermostat allows remote control over the Internet and away from home.

The design-very nice WiFi room thermostat is used to control the temperature in the house based on the set or set heating mode. This increases the temperature comfort of the house or room and reduces the cost of heating the building. The thermostat allows remote control over the Internet and away from home.

The thermostat is equipped with a touch panel under the LCD for intuitive and easy operation without the need to study the manual. The thermostat fits into luxurious interiors and induces a hi-tech look.