Digital thermostat for underfloor heating and heating equipment 1822/946 classic + ext. Sensor
This digital underfloor heating thermostat uses advanced microcomputing chip control and a high sensor to control the temperature of electrical heating devices. Control the motor ball valve, motor valve, heat valve, solenoid valve, heater, electric heating film and electric carbon crystals. It is mainly used for underfloor heating and water heating.
Nice LED design of displayed digits.
Properties:
Heating thermostat with touch screen, easy to install and use and fits comfortably into your life.
Program it according to your schedule to reduce your electricity bills.
Low-temperature freezing protection function and adjustable 30-38°C overheating protection to protect the floor.
Manual mode and programmable mode can be selected using an external sensor of 3 meters.
Keyboard blocking feature to prevent child abuse.
6 modes of programmable function to control temperature and time.
Memory function in the event of a power failure, protect your settings from power failure.
Specifications:
Color: black / white
Material: Fire proof PC + ABS
Input frequency: 60 Hz
Input voltage: AC85-240V
Temperature sensor: NTC thermometer
Temperature control accuracy: ± 1 °C
Power consumption: 1 W
Load current: 16A
Key: Touch Control
Mounting hole spacing: 59 mm (standard)
Temperature control: 5 to 38 ° C
Display: 71 * 40 mm LCD display
Item Size: Faich. 86 x 86 * 40 mm
Weight of item: about. 135g
Pack size: about 10.4 * 10 * 8 cm
Package weight: about 277g
The thermostat can be mounted either in a standard 68mm circular mounting package (KU68) or in a 68 mm square box, suitable for easier installation, or it is likely that you can install a box that has a distance between the mounting holes of 60 mm. Boxes can be either concealed or plastered. The thermostat can be installed in installation boxes 80 x 80 mm.
Programmable room wall thermostat with timer, fluorescent display and touch buttons, allows you to regulate room temperature in the range of 5 ° C ~ 38 ° C and set up to six time zones for switching circuits on weekdays and weekends with a resolution of 15 minutes. J
ednotable time zones are displayed by a graphic symbol. The circuit can also be switched on manually if necessary. Against unwanted over-adjustment is the possibility of using a child lock. The thermostat has two sensors, the internal one is built into the box and the external can be connected via the terminal box. What sensor will be active, or whether both, is set in system settings. To prevent the display from closing, when the mute is finished, it brightens for a short time when the buttons are pressed.
The thermostat has the possibility to adjust the protection against freezing and playing of the controlled area. It is designed for insertion into the installation wall box with a depth of 30mm. Mounting the wires under the screw. The set values are retained even after the power is turned off. The touch section is on the buttons not on the display.
To turn the thermostat off/on:
Press the button with sybolem ON / OFF (circle with comma)
To set the system time:
You contact the clock symbol button, the minute symbol flashes. Use the arrow keys to set the current data.
Manual / automatic circuit control:
Press the button with sybolem M. The inscription SET with hand is displayed. Press M again to switch to clock switching.
Children's lock:
Press the up and down arrow buttons simultaneously for 2s. A lock appears. Repeat to unlock the lock.
To set up a weekly program:
In the off state (the display is not lit), press the M button and the clock simultaneously for approx. 5s.
Press M one at a time to program the on time (hours/minutes) and the temperature to be maintained for all 6 time zones.
You can set up additional days/weekends by following these steps.
Press the on button to switch to operating mode.
System settings (no need to set) :
In the off state (the display is not lit), press the arrow key simultaneously for approx. 5s. Each number determines the settings:
1 - temperature calibration, factory 0 ° C
2 - hysteresis (1 ° ~ 5 ° C), factory 1 ° C
3 - sensor selection, IN - internal sensor, OU outdoor sensor, AL both sensors, factory set internal sensor.
4 - freeze protection, 00 - off, 01 - on, factory off
5 - overheating protection 30 ° ~ 38 ° C, factory 35 ° C
6 - lock the power buttons, factory 01
7 - weekly mode, 01: 5 + 2 days, 02: 6 + 1 day
