Mobile phone detector 305/16 in 7 x GSM bands
Mobile phone detector 305/16 in 7 x GSM bands
Cell Phone Detector
Mobile phone detector GSM up to 7 x 4G 800, GSM 900, 3G/4G 900, GSM 1800, 4G 1800, 3G 2100, 4G 2600. The detector also reliably indicates the VF signal of wireless cameras in the bands.
The device also has a disconnect detection from the mains, when it is disconnected, the detector automatically switches to the internal battery.
The device is designed to detect a mobile phone when communicating with a BTS station, without interference.
Generally
This device offers several options for warning against using the GSM phone within 20 m of the radius of the LED: LED lighting, acrylic light display, custom user audio warning messages. This device also provides output relays that can trigger an alarm system or other alarm device. This device warns in the event of a power failure.
If someone tries to cut the power supply, the switch output starts immediately.
Specifications
Dimension 265 x 103 x 50 mm (antenna-containing)
Weight Approx. 1.2 kg (including rechargeable battery)
Power Switching power adapter / built-in rechargeable battery
Detection frequency 4G 800, GSM 900, 3G/4G 900, GSM 1800, 4G 1800, 3G 2100, 4G 2600
Warning mode 1 Red flashing LED showing group frequency signal
Warning mode 2 User-recorded audio warning message
Warning mode 3 Transmission power, NO / NC
Warning mode 4 Acrylic light panel
Sensitivity detonator Adjusts distance detection
Distance detection Up to 20 meters
1. There is a DIP switch to select the band, based on the sensitivity of the receiver.
2. Pin 1 - Pin 7 corresponds to the 7 frequency band as shown on the image area.
3. Set the Pin of the desired frequency group to ON to open the output relay.
4. The group selection setting will not affect the red LED indication. If you detect the radio waves of your mobile phone, the corresponding red LED will flash regardless of how the switch band is set.
Low battery warning
This device has a built-in rechargeable battery.
When the power indicator on the left turns red, it means that the battery is low.
Please connect the power adapter to recharge the battery.
This device will also work during charging.
It will take about 20 hours for a full battery charge if this device is switched on (ON).
This will only take 6 hours for the battery to fully charge if the device is switched off OFF.
The battery lasts about 1 hour in permanent use.
