Audio-Video Endstage Transmitter Receiver FOX250-757
250mW end stage for audio and video transmission in the 1.2GHz band.
Audio-Video Endstage Transmitter Receiver FOX250-757
250mW end stage for audio and video transmission in the 1.2GHz band. This is a professional product. Possible range of audio, video signal is up to 500 m also on omnidirectional antennas that are included. There is also no problem using directional antennas and thus increasing the range.
The device uses 4 channels for possible video-audio transmission.
This is you can independently use seven devices at the same time.
The transmitter has a durable aluminium cover that also serves heat dissipation.
Note: DO NOT SWITCH THE APPLIANCE ON WITHOUT !!!
Video transmission is possible in any of the four channels in 250mW of performance.
You only connect the device to the camera via audio – video cable and receiver to the TV also with the help of video – audio cable and watching.
On the transmitter, you set up one of the four channels and connect a composite video signal, audio line and 12V power supply using CINCH. To receive the signal, the receiving module serves with the same wicker antenna as the transmitter. The receiver is powered by 12V and is equipped with two CINCH connectors for the output of the received PAL and audio signal. The range of the system depends on the terrain in which it is operated. For direct visibility (both antennas are seen with each other) it also reaches hundreds of meters.
On the receiver, you set the same channel on which the camera broadcasts; there are 4 channels, so you can use 4 cameras in one object.
Parameters:
Broadcast band: 1.2 GHz
Transmitter dimensions: 55 x 52 x 20 mm
Transmitter power supply: 12V / 300mA
Broadcast power: 28dB
Receiver dimensions: 140 x 80 x 22 mm
Receiver power: 12V / 200mA