Jammer WiFi 11a.b.g. zone 677- 2,4GHz a 5,4GHz 2x 4W

2.4GHz 207-1x 1.5W WiFi interrupter  

(prevent wifi bandwidth from be used).  

Total weight of the device 250g. 

Power from an external source on a 230V network.

Range approx. 0-20m. 

Product from the group "Special Mode"

The product of a group of "special regime"

2.4GHz 223-1x 350mW WiFi interrupter

 (prevent the use of WiFi bands), supplemented by GSM bands other than 3G.  

Total weight of the device 250g. 

Power supply from your own battery, or possibility to connect to a 230V network.

Range approx. 0-20m.   

Product from the group "Special Mode"

The product of a group of "special regime"

Powerful robust base broadband locomotive tuned to one of the bands disturbed:

Attention jammer also emits in the band of wireless alarms and remote controls 433MHz and 866MHz. Accordingly, within the scope of the jammer in question, those services will be rendered inoperable. Jammer also interferes with the frequencies of the police and emergency services. Therefore, equipment cannot be tested or demonstrated in public within the meaning of the law, only in modified conference rooms where unwanted radio spectrum does not leak outside the designated room. 

As it is a base station, it is not equipped with internal batteries and is designed to be powered from the supplied 230V/50Hz mains source. 

Cellular jammers 8-14 degrees (5) B

Cellular jammers are designed to suppress unauthorized data retrieval equipment operating in mobile network standards, Bluetooth or WiFi. Their operation is based on generating noise interference in the required frequency band. Besides, they enable gradual adjustment of the interference signal power in all the bands, which facilitates blocking of wireless communication standards within the protected room only.

This device is a leader in the sigint series of blocking devices, as it combines all the functions.

Since it is a base station, it is not equipped with internal batteries and is designed to be powered from the supplied 230V/50Hz power supply, it is possible to finish the battery power supply. Or, if the power needs to be supplied in field conditions, the problem is not to supply the power supply for the parameters you specify. You can turn on interference by using a local switch on the station.