The detector is designed to search for and detect all camcorders, including masked ones. It allows you to identify wired and wireless camera types that currently work and do not work. Hidden cameras are recognized by the dazzling lenses of their lenses.
The detector is designed to search for and detect all camcorders, including masked ones. It allows you to identify wired and wireless camera types that currently work and do not work. Hidden cameras are recognized by the dazzling lenses of their lenses.
Despite its small size (only 70 x 52 x 21 mm), the BugHunter Dvideo Nano has a good range and the detection efficiency has been increased compared to previous models thanks to the use of updated software with an optimized flash mode.
The detector has an ultra-modern element base and a long battery life of up to 10 hours.
"BugHunter Dvideo Nano" is ideal for those who travel a lot (business trips, business trips, etc.) - it is advisable to carry them and use them without others noticing.
The principle of the device
Each camera has a lens that includes a lens. The principle of operation of the device is the detection of light reflections that are reflected by the lens of hidden video cameras. The detector emits a strong luminous flux of the red spectrum. When such a current strikes the hidden camera lens, it is reflected into the detector lens and the user sees a flash of light that cannot be confused with anything (ordinary objects do not show clear reflections). Properly searched, "BugHunter Dvideo Nano" guarantees 100% camcorder detection.
Differences from "BugHunter Dvideo Nano" from "BugHunter Dvideo"
Super miniature dimensions. The detector is so miniature that it can be easily hidden in the fist.
The detection range is slightly less than 18 meters (instead of 20 meters). This difference is almost imperceptible and there are no inconveniences when working with the device.
Another subsystem for detecting cameras in the near field has been removed (green LEDs on the front panel). As a result, the "visibility" of the flare when searching for cameras decreased slightly.
There is no selection of operating modes (flash frequency). In "BugHunter Dvideo", it was possible to select one of 5 operating modes with different emitter flash frequencies to adapt to the room lighting. The "Nano" version instead uses a specially selected LED flash speed algorithm, which is optimal for rooms with different lighting conditions.
Simplified battery charge indication. There are 3 LEDs (not 5) on the side of the "BugHunter Dvideo Nano" detector housing, which provide less information about the battery charge, but perform their main function just as well - drawing attention to the need to charge the battery over time.
Battery life has been significantly extended (from 2 to 10 hours). Thanks to the use of a modern Li-Ion battery, it was possible to achieve an incredibly high autonomy of the device with a miniature size. The BugHunter Dvideo detector is designed for office or home use and can be powered either from the mains or from the battery. Therefore, two hours of battery life will be enough for it. The "Nano" model is a mobile version of the detector, for which battery life is of great importance.
The detector is designed to search for and detect all camcorders, including masked ones. It allows you to identify wired and wireless camera types that currently work and do not work. Hidden cameras are recognized by the dazzling lenses of their lenses.
It is intended for the implementation of operational measures for the detection and localization of technical means of secret intelligence, for the identification of natural and artificially created channels of information leakage, as well as for the control of the quality of information protection.
It is intended for the implementation of measures for the detection and localization of special technical means (STS) for the secret acquisition of information and identification of natural and artificially created channels of information leakage.
The only nonlinear locator in the world with a 3600 MHz probe signal and the ability to remotely detect semiconductor devices with spatial target selection.
The only multifunctional nonlinear locator in the world with a built-in 2nd and 3rd harmonic spectrum analyzer and interchangeable antenna modules for 3 frequency ranges: 800, 2400 and 3600 MHz.
The RAKSA-120 selective field indicator is designed to detect in the near zone and determine the position of radio transmitting devices used for covert recording of audio and video information.
The OPTIK-2 device is designed for searching and locating hidden masked video cameras in the interior (including cameras with a pin lens) regardless of their operating status and the type of transmission or recording of the video signal.
The complex is designed for continuous, periodic or operational monitoring of the radio situation, for the detection of unauthorized radio emissions, including transmitters using complex masking algorithms (information accumulation, frequency tuning, broadband and noise-like emissions, etc.), detailed study of radio signals, localization of their sources , as well as for the creation of archives of radio monitoring results.
Any surveillance agent will not be alerted by ultrasonic tone. Sonic marking technique, a powerful method of detecting room transmitters - ideal when monitoring sensitive locations. It is possible to find surveillance devices and accurately display the distance from the receiver.
Detection Capability Comprehensive
The use of 4 built-in receivers operate simultaneously the device can detect a variety of broadcasts and provides detailed analysis including signal differentiation, allowing detection of shoved transmitters operating in an environment in which radio frequency signals are much stronger. Built-in receivers are wide frequency modulation; narrow frequency modulation; amplitude modulation and transmission of the sub-carrier.
