SA-210 Stud detector with terminal block

Magnetic door contact (open) - miniature design.

Monitor the height of the water level (tank depth: 0.5 m to 15 m) from the comfort of your own living room, up to a distance of 100 m.

Ultrasonic water level sensor – Measurement of liquid level level + WiFi transmission LCD 086_ EG.

EG_ Liquid level meter, Temperature sensor, Low battery sensor Indicator G

It is used to detect CO (carbon monoxide) gas and to provide early warning of the dangerous effects of this gas on human health. The detector is certified for installations in the interiors of buildings, caravans and boats.

Non-contact liquid level sensor module - Waterproof sensor Water level detector for 20 mm vessel wall

The intelligent non-contact liquid level sensor is used to determine if there is liquid in the pipe / container. It changes the state of the output when it is detected that liquid is passing through the measured object.

Voltage reduction from 12V to 9V,

Flood sensors are designed to indicate fault states (e.g. water leakage) in exchange station, boiler rooms and similar facilities. They are powered according to type 24 V dc or AC voltage. The sensor is placed in a plastic housing suitable for direct wall mounting.

The sensor belongs to the category of conductive types of sensors. When connecting the electrodes located at the bottom of the sensor box with conductive medium, selected outputs are activated, fault signals are sent to the parent system and the red LED inside the device is lit.

Mini self-adhesive magnetic contact with lead, size: 33 x 8 x 9 mm.

Mobile phone detector GSM up to 7 x 4G 800, GSM 900, 3G/4G 900, GSM 1800, 4G 1800, 3G 2100, 4G 2600. The detector also reliably indicates the VF signal of wireless cameras in the bands.

The device also has a disconnect detection from the mains, when it is disconnected, the detector automatically switches to the internal battery.

This device offers several options for warning against using the GSM phone within 20 m of the radius of the LED: LED lighting, acrylic light display, custom user audio warning messages. This device also provides output relays that can trigger an alarm system or other alarm device. This device warns in the event of a power failure.

If someone tries to cut the power supply, the switch output starts immediately.

Voltage converter with 230V to 12V, 130W - according to the available offer. 

Model designed for scaremonuners, powering netbooks, ultrabooks and laptops and other more powerful electrical devices. But it is also suitable for powering our plascanes with offers. 

It is used to detect CO (carbon monoxide) gas and to provide early warning of the dangerous effects of this gas on human health. The detector is certified for installations in the interiors of buildings, caravans and boats.

Video verification cameras provide the user and the PCO with a visual confirmation of what caused the alarm and what is happening in the building. When an event is selected, it creates a record automatically, so the user is in the image when something happens.

Quality alkaline batteries of 9 volts for various types of electrical equipment, remote controls and the like.

The radar motion sensor operates on a different principle from the normal PIR sensor. This sensor is equipped with a very sensitive and reliable sensor that works on the principle of transmitting high frequency radiomagnetic (radar) waves. If the field is disturbed by movement, the sensor will start the light. The sensor also works through doors, windows or thin walls. For the sensor it is possible to control the range (2 - 8m), time, twilight settings or whether it turns off before opening the door or only after opening it.

PT-TAPE02-BW laminated ribbon for printer PT-2430PC and PT-P700, ribbon width 12 mm.

Stud miniature detector with cable - EXTRA THIN Ø 9 mm, magnet length 3 mm, relay 14 mm, working distance max. 19 mm, white design.